8
ENGLISH
HOW TO ASSEMBLE
Carefully unpack all parts of the steamer including those in the
polystyrene packaging.
1. The stainless steel pole consists of four sections. Fully extend
and tighten all segments of telescope pole by rotating the pole
clockwise (Figure A). Always keep pole at full height when steaming.
2. Unfold the hanger and place on the top of the telescopic pole.
3. From the bottom of the pole, add the ironing board support xture.
Ensure this is the correct way up according to the arrows (Figure C).
Figure A
Figure C
Figure B
To Next Page
Loading...