6
FRIDJA
1. Cut the citrus fruit in half and place one of the halves onto the dome with the cut
section facing downwards.
2. Close the lid; ensure that it is heard locking into place.
3. Use the On/O switch to turn the appliance on. A beep-signal is heard and the
‘Start’ button lights up.
4. Push the ‘Start’ button until you hear a beep-signal.
5. The fruit is now pushed up, juice is extracted and the fruit is lowered again, the juice
being collected in the container.
6. Wait until the motor has come to a complete standstill. Now the lid can be opened,
the fruit residue removed and a new piece of fruit put on the dome.
7. When processing larger quantities of fruit, the pulp sieve must be emptied from time
to time as necessary.
8. When extracting juice from larger fruit (e.g. grapefruit), ensure that the Max marking
is not exceeded — the juice outlet must be folded down early enough.
9. After use, fold the juice outlet up and switch the appliance o.
10. Remove the plug from the wall outlet and clean the appliance. There is a power-cord
storage compartment in the base.
HOW TO OPERATE
For a YouTube video - scan this QR code or
go to this link:
https://www.youtube.com/c/Fridja
To Next Page
Loading...
