3
Insert a flat bladed screwdriver
into the slot A at the base of the
push. Carefully lever the cover
and base apart (Fig. 1).
Open the bell push
A
Fig. 1
Insert the CR2032 coin cell. Ensure the face
marked ‘+’ is uppermost (Fig. 2).
To fit the push battery
Fig. 2
CR2023
+
Mount using either the double
sided adhesive pad, or the
screws provided (see Fig 3).
Test your push before fixing.
Avoid fixing to metal structures.
Mount the bell push
Fig. 3
To Next Page
Loading...
