EasyManua.ls Logo

Friedrich Breeze BR1224W3A User Manual

Friedrich Breeze BR1224W3A
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation Instructions
for BR1224W3A
12000 - 24000 Btu
Breeze
A revolution in room cooling
Friedrich Part No. 96091001
Service Questions: Contact Friedrich at (800) 541-6645
Sales Inquiries: Contact Sylvane at (800) 934-9194 or visit sylvane.com
Question and Answer IconNeed help?

Do you have a question about the Friedrich Breeze BR1224W3A and is the answer not in the manual?

Friedrich Breeze BR1224W3A Specifications

General IconGeneral
Cooling Capacity12, 000 BTU
Cooling AreaUp to 550 sq. ft.
Voltage115V
Weight65 lbs
Power Supply115V/60Hz
RefrigerantR-410A
TypeWindow Air Conditioner
Noise Level54 dB

Summary

What's in the carton?

Tools you will need

Before getting started

Placing the indoor unit

Placing the outdoor unit

CAUTION

STEP 1 - Determine how you will connect the indoor and outdoor modules

Option 1: Through-the-Wall Installation

Connects indoor and outdoor units via a 3-inch hole drilled through the wall.

Option 2: Window Installation

Connects units using the Friedrich SimpleSill™ kit through a window.

STEP 2 - Hang wall mount bracket

STEP 3 - Drill hole (Option 1) or mount SimpleSill™ (Option 2)

Option 1: Drill hole Through-the-Wall Installation

Procedure for drilling a 3-inch hole through the exterior wall for unit installation.

Option 2: Window Installation Using Friedrich SimpleSill™

STEP 4 - Line set installation

Option 1 (3” hole pass through)

Instructions for passing the line set through a 3-inch wall hole.

Option 2 (SimpleSill™ window installation)

Instructions for passing the line set through a window using the SimpleSill™.

STEP 5 - Hang the indoor module on the wall bracket

STEP 6 - Place the mounting pad

STEP 7 - Connect the quick connector from the indoor line set outdoor module

STEP 8 – Connect the electrical connector from the connecting line to outdoor module

STEP 9 - Locate the condensate drain

STEP 10 – Final Preparation

Routine Maintenance

Cleaning the unit

Instructions for cleaning the outer cover of the indoor module with a damp cloth.

Cleaning the outdoor module

Guidance on cleaning the outdoor module with low-pressure water.

Cleaning the filter

Steps to access and clean the washable filter of the indoor module.

Remote Control Operation

Special Features

LOCK

Locks and unlocks the remote control by pressing two buttons simultaneously.

Fahrenheit /Celsius

Toggles temperature display between Fahrenheit and Celsius.

Related product manuals