Need help?Do you have a question about the Friedrich PZH12K3SB and is the answer not in the manual?
General| Cooling Capacity | 12, 000 BTU/h |
|---|---|
| Refrigerant | R-410A |
| Noise Level | 52 dB (Low) |
| Voltage | 115V |
| Voltage (V/Hz) | 115V/60Hz |
| Amperage (Cooling) | 10.5 A |
| Indoor Unit Noise Level (dB) | 52 dB (Low) |
| Fan Speeds | 3 |
General safety warnings for installation and repair procedures.
Details hazards related to personal injury or death during operation or service.
Information on hazards that can cause property damage, including fire and water damage.
Technical specifications for 7-9k electric heat models.
Technical specifications for 7-9k heat pump models.
Technical specifications for 12-15k electric heat models.
Technical specifications for 12-15k heat pump models.
Details electrical data including receptacles, fuses, and circuit breakers.
Explains the basic principles and cycle of the refrigeration system.
Illustrates the refrigerant flow for cooling/heat pump and cooling/electric heat modes.
Electrical connection procedures and safety precautions for wiring the unit.
Procedures and considerations for charging the refrigerant system.
Symptoms and diagnosis of systems with insufficient refrigerant charge.
Symptoms and diagnosis of systems with excess refrigerant charge.
Troubleshooting guide for systems with partial or complete refrigerant restrictions.
Acceptable method for charging sealed systems using the weigh-in method.
Detailed procedure for replacing a compressor, including burnout precautions.
Explains error codes E2, E3, E4, E5, E8, E9 and their troubleshooting steps.
Troubleshooting steps when the compressor fails to run.
Illustrated breakdown and part numbers for PZE models.
Illustrated breakdown and part numbers for PZH models.
To Next Page