Friedrich Floating Air Pro-Premiere FPHFW18A3A User Manual (English)

Questions and Answers:

Z
Zachary MoralesSep 8, 2025
What to do if my Friedrich Floating Air Pro-Premiere FPHFW18A3A Air Conditioner has an outdoor coil anti-overload protection with cooling?
- E
  Elizabeth MonroeSep 8, 2025
  If your Friedrich Air Conditioner is experiencing outdoor coil anti-overload protection during cooling, consider the following: * Check if there is too much refrigerant. * Replace the outdoor fan motor. * Replace the outdoor fan. * Clean the condenser. * Check if the air inlet and outlet of the indoor unit and outdoor unit are normal.
K
kenneth14Aug 23, 2025
What to do if my Friedrich Air Conditioner is showing current overload protection?
- R
  Richard AndersonAug 23, 2025
  If your Friedrich Air Conditioner is showing a current overload protection error, you can take the following steps: * Check if the fan motor is running abnormally. * Clean the condenser and evaporator. * Ensure that the air inlet and outlet are not blocked and are functioning normally.
M
monicanewmanAug 25, 2025
What to do if my Friedrich Air Conditioner's compressor exhaust temperature is too high?
- L
  Louis SanchezAug 25, 2025
  If your Friedrich Air Conditioner is showing a compressor exhaust temperature too high protection error, you can try the following: * Replace the compressor exhaust temperature sensor. * Check if the unit has a low refrigerant level.
W
William BrownAug 27, 2025
What to do if my Friedrich Floating Air Pro-Premiere FPHFW18A3A displays maximum current protection?
- P
  Paul GonzalezAug 27, 2025
  If your Friedrich Air Conditioner is displaying a maximum current protection error, consider the following solutions: * Replace the outdoor control board. * Replace the drive board. * Replace any other components that may be short-circuited.
A
Andrew WebbAug 27, 2025
Why is my Friedrich Floating Air Pro-Premiere FPHFW18A3A's outdoor fan motor locked?
- R
  rspencerAug 28, 2025
  If your Friedrich Air Conditioner's outdoor fan motor is locked, consider the following: * Check if the connection of the outdoor fan motor is loose. * Check for any obstructions blocking the outdoor fan. If neither of these resolves the issue, you may need to replace the fan motor or the outdoor control board.
T
tracy73Aug 29, 2025
What to do if my Friedrich Floating Air Pro-Premiere FPHFW18A3A Air Conditioner's compressor shell temperature is too high?
- R
  rosariostephenAug 29, 2025
  If your Friedrich Air Conditioner's compressor shell temperature is too high, you can try the following: * Check if the compressor exhaust temperature sensor connector is loose. * Check if the refrigerant level of the unit is low.
K
Keith SwansonSep 10, 2025
What to do if my Friedrich Floating Air Pro-Premiere FPHFW18A3A Air Conditioner has a compressor exhaust temperature sensor fault?
- C
  Christopher ReyesSep 10, 2025
  If your Friedrich Air Conditioner is showing a compressor exhaust temperature sensor fault, you can try these steps: * Check if the compressor exhaust temperature sensor is connected loosely. * Replace the compressor exhaust temperature sensor. * Replace the outdoor control board.
M
Makayla WilsonSep 7, 2025
What to do if my Friedrich Floating Air Pro-Premiere FPHFW18A3A has an outdoor coil temperature sensor fault?
- R
  Ricardo CunninghamSep 7, 2025
  If your Friedrich Air Conditioner is showing an outdoor coil temperature sensor fault, you can try these steps: * Check if the outdoor coil sensor is connected loosely. * Replace the outdoor coil temperature sensor. * Replace the outdoor control board.
A
Alexandra HicksSep 4, 2025
What causes a DC compressor start failure in my Friedrich Floating Air Pro-Premiere FPHFW18A3A Air Conditioner?
- G
  Gregory JonesSep 4, 2025
  If your Friedrich Air Conditioner experiences a DC compressor start failure, consider these solutions: * Replace the outdoor drive board. * Replace the compressor.
J
Jason MartinezSep 5, 2025
What to do if my Friedrich Floating Air Pro-Premiere FPHFW18A3A's outdoor ambient temperature sensor is faulted?
- J
  Jacqueline FernandezSep 5, 2025
  If the outdoor ambient temperature sensor on your Friedrich Air Conditioner is faulted, you can try the following: * Check if the outdoor ambient temperature sensor connector is loose. * Replace the outdoor ambient temperature sensor. * Replace the outdoor control board.