Friedrich Floating Air Pro-Premiere FPHW091 User Manual (English)

Questions and Answers:

Y
Yvonne WagnerSep 8, 2025
What to do if my Friedrich Floating Air Pro-Premiere FPHW091 Air Conditioner has an outdoor coil anti-overload protection with cooling?
- S
  Susan RasmussenSep 8, 2025
  If your Friedrich Air Conditioner is experiencing outdoor coil anti-overload protection during cooling, consider the following: * Check if there is too much refrigerant. * Replace the outdoor fan motor. * Replace the outdoor fan. * Clean the condenser. * Check if the air inlet and outlet of the indoor unit and outdoor unit are normal.
S
scolemanAug 23, 2025
What to do if my Friedrich Air Conditioner is showing current overload protection?
- R
  rebecca39Aug 23, 2025
  If your Friedrich Air Conditioner is showing a current overload protection error, you can take the following steps: * Check if the fan motor is running abnormally. * Clean the condenser and evaporator. * Ensure that the air inlet and outlet are not blocked and are functioning normally.
J
John ShawAug 25, 2025
What to do if my Friedrich Air Conditioner's compressor exhaust temperature is too high?
- S
  Stephanie KimAug 26, 2025
  If your Friedrich Air Conditioner is showing a compressor exhaust temperature too high protection error, you can try the following: * Replace the compressor exhaust temperature sensor. * Check if the unit has a low refrigerant level.
F
Felicia BallardAug 27, 2025
What to do if my Friedrich Floating Air Pro-Premiere FPHW091 Air Conditioner displays maximum current protection?
- D
  David FloresAug 27, 2025
  If your Friedrich Air Conditioner is displaying a maximum current protection error, consider the following solutions: * Replace the outdoor control board. * Replace the drive board. * Replace any other components that may be short-circuited.
J
Joshua WeissAug 28, 2025
Why is my Friedrich Floating Air Pro-Premiere FPHW091 Air Conditioner's outdoor fan motor locked?
- D
  daniel29Aug 28, 2025
  If your Friedrich Air Conditioner's outdoor fan motor is locked, consider the following: * Check if the connection of the outdoor fan motor is loose. * Check for any obstructions blocking the outdoor fan. If neither of these resolves the issue, you may need to replace the fan motor or the outdoor control board.
K
Kara JacksonAug 29, 2025
What to do if my Friedrich Air Conditioner's compressor shell temperature is too high?
- R
  Ryan HamiltonAug 29, 2025
  If your Friedrich Air Conditioner's compressor shell temperature is too high, you can try the following: * Check if the compressor exhaust temperature sensor connector is loose. * Check if the refrigerant level of the unit is low.
K
kristensilvaSep 10, 2025
What to do if my Friedrich Floating Air Pro-Premiere FPHW091 has a compressor exhaust temperature sensor fault?
- C
  Cynthia CamachoSep 10, 2025
  If your Friedrich Air Conditioner is showing a compressor exhaust temperature sensor fault, you can try these steps: * Check if the compressor exhaust temperature sensor is connected loosely. * Replace the compressor exhaust temperature sensor. * Replace the outdoor control board.
E
Elizabeth BlackburnSep 7, 2025
What to do if my Friedrich Floating Air Pro-Premiere FPHW091 Air Conditioner has an outdoor coil temperature sensor fault?
- R
  Robert BurkeSep 7, 2025
  If your Friedrich Air Conditioner is showing an outdoor coil temperature sensor fault, you can try these steps: * Check if the outdoor coil sensor is connected loosely. * Replace the outdoor coil temperature sensor. * Replace the outdoor control board.
C
charlessummersSep 4, 2025
What causes a DC compressor start failure in my Friedrich Floating Air Pro-Premiere FPHW091 Air Conditioner?
- M
  Michael ZamoraSep 4, 2025
  If your Friedrich Air Conditioner experiences a DC compressor start failure, consider these solutions: * Replace the outdoor drive board. * Replace the compressor.
J
Jeffrey MccallSep 5, 2025
What to do if my Friedrich Floating Air Pro-Premiere FPHW091's outdoor ambient temperature sensor is faulted?
- M
  Melissa WalkerSep 5, 2025
  If the outdoor ambient temperature sensor on your Friedrich Air Conditioner is faulted, you can try the following: * Check if the outdoor ambient temperature sensor connector is loose. * Replace the outdoor ambient temperature sensor. * Replace the outdoor control board.

Friedrich Floating Air Pro-Premiere FPHW091 Specifications

General

Smart	Yes
Energy Efficiency Ratio (EER)	12.0
Operating Frequency (Hz)	60
Refrigerant	R-410A
BTU	9, 000 BTU
Cooling Capacity (BTU)	9, 000 BTU
Operating Voltage (V)	115V