To Next PageTo Next Page
Need help?Do you have a question about the Friedrich FPHFR9A3A and is the answer not in the manual?
General| Voltage | 115 V |
|---|---|
| Operating Voltage | 115 V |
| Operating Frequency | 60 Hz |
| Cooling Capacity | 9, 000 BTU |
| Noise Level | 52 dB |
| Power Supply | 115V, 60Hz |
Crucial safety guidelines for installation and operation.
Detailed performance ratings and technical specs for cassette models.
Cooling and heating capacity tables for ducted units based on temperature.
Diagram and component list for the refrigerant cycle of 9-18k outdoor units.
Step-by-step guide for refrigerant system leak testing, evacuation, and charging.
Detailed procedure for charging the system with refrigerant after repairs.
Step-by-step instructions for replacing the compressor and motor in 9-18k outdoor units.
Instructions for replacing compressor and motor in 9k/12k ducted indoor units.
Table showing resistance values for compressor discharge temperature at various temperatures.
Resistance tables for ambient air sensors at different temperatures.
Guide for checking the refrigerant system flow and pressure during cooling and heating runs.
General guide to troubleshooting issues based on fault codes displayed on the unit.
Lists and explains fault codes specific to outdoor units and their remedies.
Lists and explains fault codes specific to indoor units and their remedies.
Troubleshooting guide for drive fault codes affecting 3.0/3.5HP units.
