Friedrich Floating Air Pro-Premiere FPHSR12A3A User Manual (English)

Questions and Answers:

D
Dale EdwardsSep 8, 2025
What to do if my Friedrich Floating Air Pro-Premiere FPHSR12A3A has an outdoor coil anti-overload protection with cooling?
- A
  Aaron RobertsSep 9, 2025
  If your Friedrich Air Conditioner is experiencing outdoor coil anti-overload protection during cooling, consider the following: * Check if there is too much refrigerant. * Replace the outdoor fan motor. * Replace the outdoor fan. * Clean the condenser. * Check if the air inlet and outlet of the indoor unit and outdoor unit are normal.
P
phillip01Aug 23, 2025
What to do if my Friedrich Air Conditioner is showing current overload protection?
- M
  Marvin DeckerAug 23, 2025
  If your Friedrich Air Conditioner is showing a current overload protection error, you can take the following steps: * Check if the fan motor is running abnormally. * Clean the condenser and evaporator. * Ensure that the air inlet and outlet are not blocked and are functioning normally.
J
Jacob ReyesAug 25, 2025
What to do if my Friedrich Air Conditioner's compressor exhaust temperature is too high?
- L
  Leah WeaverAug 26, 2025
  If your Friedrich Air Conditioner is showing a compressor exhaust temperature too high protection error, you can try the following: * Replace the compressor exhaust temperature sensor. * Check if the unit has a low refrigerant level.
A
Allison DavenportAug 27, 2025
What to do if my Friedrich Air Conditioner displays maximum current protection?
- J
  Jeffrey RussellAug 27, 2025
  If your Friedrich Air Conditioner is displaying a maximum current protection error, consider the following solutions: * Replace the outdoor control board. * Replace the drive board. * Replace any other components that may be short-circuited.
H
Heather KellyAug 27, 2025
Why is my Friedrich Floating Air Pro-Premiere FPHSR12A3A's outdoor fan motor locked?
- B
  browningjulieAug 28, 2025
  If your Friedrich Air Conditioner's outdoor fan motor is locked, consider the following: * Check if the connection of the outdoor fan motor is loose. * Check for any obstructions blocking the outdoor fan. If neither of these resolves the issue, you may need to replace the fan motor or the outdoor control board.
R
Reginald WilliamsAug 29, 2025
What to do if my Friedrich Air Conditioner's compressor shell temperature is too high?
- A
  Antonio WyattAug 29, 2025
  If your Friedrich Air Conditioner's compressor shell temperature is too high, you can try the following: * Check if the compressor exhaust temperature sensor connector is loose. * Check if the refrigerant level of the unit is low.
K
Kelly AlexanderSep 14, 2025
Why is my Friedrich Floating Air Pro-Premiere FPHSR12A3A's indoor fan motor running abnormally?
- S
  Stacey JenkinsSep 14, 2025
  If your Friedrich Air Conditioner's indoor fan motor is running abnormally, try the following: * Check if there is something blocking the indoor fan motor. * Check the fan motor cord connection. If the issue persists, you may need to replace the fan motor or the indoor control board.
J
James ScottSep 10, 2025
What to do if my Friedrich Floating Air Pro-Premiere FPHSR12A3A Air Conditioner has a compressor exhaust temperature sensor fault?
- S
  Shelly Castro DVMSep 12, 2025
  If your Friedrich Air Conditioner is showing a compressor exhaust temperature sensor fault, you can try these steps: * Check if the compressor exhaust temperature sensor is connected loosely. * Replace the compressor exhaust temperature sensor. * Replace the outdoor control board.
M
michaelalvaradoSep 7, 2025
What to do if my Friedrich Floating Air Pro-Premiere FPHSR12A3A Air Conditioner has an outdoor coil temperature sensor fault?
- M
  Mary AlvaradoSep 7, 2025
  If your Friedrich Air Conditioner is showing an outdoor coil temperature sensor fault, you can try these steps: * Check if the outdoor coil sensor is connected loosely. * Replace the outdoor coil temperature sensor. * Replace the outdoor control board.
C
Carlos RossSep 4, 2025
What causes a DC compressor start failure in my Friedrich Floating Air Pro-Premiere FPHSR12A3A?
- K
  Keith SantosSep 4, 2025
  If your Friedrich Air Conditioner experiences a DC compressor start failure, consider these solutions: * Replace the outdoor drive board. * Replace the compressor.