Friedrich FSHSR09A1A - Configuration of Connection Pipe; Connection Pipe Specifications

Max length of connection pipe Unit: 
);
1. Standard length of connection pipe
● )-22-2%
4. 9*("
● 9"*(##2-
-)<
● The calculation method of additional refrigerant charging amount (on the basis
of liquid pipe):
● Basing on the length of standard pipe, add refrigerant according to the
9=((

2.Min. length of connection pipe is >.
3.Max. length of connection pipe.
Configuration of connection pipe
%- ;-
%- >$
%- >$
<$ >$
;- >$
Cooling
capacity
Max length
of connec-
tion pipe
Cooling
capacity
Max length
of connec-
tion pipe
5000Btu/h
7000Btu/h
9000Btu/h
12000Btu/h
18000Btu/h
24000Btu/h
28000Btu/h
36000Btu/h
42000Btu/h
48000Btu/h
requirement as shown in the table. The additional refrigerant charging amount
per foot is different according to the diameter of liquid pipe. See the
following sheet.