To Next PageTo Next PageWhy Friedrich Air Conditioner doesn't operate immediately?
If your Friedrich air conditioner is stopped and immediately restarted, the compressor has a built-in delay. It will not operate for about 3 minutes to prevent fuse issues. Also, when the power is disconnected and then reconnected, a protection circuit activates for approximately 3 minutes, which prevents the unit from operating during this time.
General| Cooling Capacity | 9, 000 BTU |
|---|---|
| Voltage | 115V |
| Refrigerant | R-410A |
| Fan Speeds | 3 |
| Operating Frequency | 60 Hz |
| Amperage | 7.8 A |
| Noise Level | 52 dB |
Explains the meaning of WARNING and CAUTION statements used in the manual.
Details the meaning of various safety symbols for warnings, prohibitions, and user instructions.
Essential safety rules for operating the air conditioner to prevent personal harm.
Safety advice regarding unit location, surroundings, and potential hazards.
How the unit automatically selects operating modes based on room conditions.
How to set and use the sleep timer for gradual temperature adjustment.
Highlights remote control convenience and swing operation for air distribution.
Information on mildew-resistant filter and super quiet mode features.
Lists and identifies parts of the indoor air conditioning unit.
Lists and identifies parts of the outdoor air conditioning unit.
Identifies buttons and display elements of the remote control.
Instructions for connecting power to the unit via the circuit breaker.
Steps for inserting batteries into the remote control unit.
Guide to setting the current time on the remote control.
Instructions for installing the remote control holder.
How to choose between AUTO, COOL, DRY, and FAN modes.
Guide to adjusting the desired room temperature.
Explains how to change fan speed settings like AUTO, HIGH, MED, LOW, QUIET.
Explains AUTO mode selection based on room conditions.
How to turn off the unit using the START/STOP button.
Specific guidance for using Cooling, Dry, and Fan modes.
Steps to schedule when the unit turns on or off.
Guide to setting combined ON/OFF timer sequences.
How to cancel timers or change operating conditions.
How to activate and set the sleep timer duration.
Explains how the sleep timer adjusts temperature for comfort.
Steps to deactivate the sleep timer.
How to adjust vertical louvers using the remote control.
How to manually adjust horizontal louvers.
Cautions regarding airflow adjustment and children.
How to activate the automatic swing of louvers.
How to deactivate the automatic swing feature.
Explains when swing operation may pause and its limitations.
How to operate the unit directly from the main control panel.
Essential safety steps before cleaning the unit.
Method for cleaning the indoor unit's exterior.
Steps to take when the unit will not be used for over a month.
Recommendation for regular professional inspections and repairs.
Instructions for cleaning the main air filter.
Guidance on installing and maintaining the optional filter.
What to do in case of burning smell or other serious issues.
Explains delays due to protection circuits or restart attempts.
Identifies normal operational sounds like coolant flow or expansion noises.
Explains potential smells and mist/steam during operation.
Troubleshooting weak airflow during different modes.
Basic checks for power, fuses, and timer settings when unit is off.
Checks for blocked vents, open windows, or incorrect settings.
Reasons for unit operating differently than remote settings.
How the unit behaves after a power failure during timer operation.
Potential malfunctions due to external electrical interference.
Specifies optimal indoor/outdoor conditions for cooling and dry modes.
Explains how the unit protects itself under extreme temperature conditions.
Clarifies that the unit is for dwelling rooms only.
Detailed technical data for the MW09C1E model.
Detailed technical data for the MW12C1E model.
Conditions under which the specifications were measured.
