Note:
Follow wiring diagram to ensure that short circuit will not happen. Incorrect wiring can
cause potential for fire.
●
The breaker switch must have the functions of magnetic tripping and heat tripping, in
order to protect from short circuit.
Ensure that power circuit is dedicated and not shared with other equipment.
Power cable diameter should be followed.
2.
Do not damage power cord.
3.
4.
5.
Be sure to follow local and national electrical code.
Notices for installation
Safety Requirements For Electric Appliances
1.
Consideration should be made in location of outdoor unit as heat/cool is emitted, pets and
neighbors could be affected by this.
2. Select a location where there should be sufficient ventilation.
3.
Select a location where there should be no obstructions to cover the inlet and outlet.
4. The location should be able to withstand the full weight and vibration of the outdoor unit
and permit safe installation.
5. Select a dry place, but do not expose under the direct sunlight or strong wind.
6.
Outdoor Unit Installation Position Selection
Installation should follow instructions and dimensions.
16
1.
Keep system 5 feet from combustibles.
To Next Page
Loading...
Need help?
General
