If the wireless remote control is lost or
broken, please use the manual switch
button. At this time, the unit will run in the
Auto mode, the temperature and fan
speed cannot be changed. The
operation is shown below:
●
●
Emergency operation
●
●
Manual switch
Fig.3
Front Panel Illumination On/Off
Display indicator light control of indoor unit
To turn 'On'
the light function,the icon will display
on the remote control screen by pressing the "Light"
button. In which case,the display indicator light will be
on if the unit receives this signal.
To turn 'Off
'
the light function,the
will
disappear
on
the remote control screen by pressing
this button. In which case, the display indicator light
will be off if the unit receives this signal.
Display indicator light on:
Display indicator light off:
Turn off the unit:
Press manual switch to turn off unit.
(Fig .3) Open front panel and the manual switch
is on the rightside near electrical connection
cover.
Turn on the unit:
Press manual button and unit will run in
Auto mode immediately. The unit will adjust
to the indoor temperature previously
selected (Cooling or Fan) and obtain a
comfortable setting.
To Next Page
Loading...
Need help?
General
