To Next PageTo Next PageWhy Friedrich MW09C1E Air Conditioner doesn't operate immediately?
If your Friedrich air conditioner is stopped and immediately restarted, the compressor has a built-in delay. It will not operate for about 3 minutes to prevent fuse issues. Also, when the power is disconnected and then reconnected, a protection circuit activates for approximately 3 minutes, which prevents the unit from operating during this time.
General| Cooling Capacity | 9, 000 BTU |
|---|---|
| Weight | 60 lbs |
| Operating Voltage | 115V |
| Operating Frequency | 60 Hz |
| Power Supply | 115V/60Hz |
| Refrigerant | R410A |
Explains warning, caution, and associated symbols used in the manual.
Emphasizes professional installation and repair for user safety.
Covers direct airflow, inserting objects, and handling malfunctions.
Discusses ventilation, water exposure, and object placement around the unit.
Advises on power disconnection, battery handling, and securing the intake grille.
Covers placement near heat sources and general safety during operation.
Describes automatic mode, sleep timer, and quiet operation features.
Covers wireless remote, swing operation, and airflow adjustments.
Details removable intake grille and mildew-resistant filter.
Lists and labels components of the indoor and outdoor units.
Identifies parts of the remote control and its display.
Instructions for turning on power and loading batteries.
Guide for setting the clock on the remote control.
Information on using the remote control and its holder.
Steps for selecting operation mode and adjusting temperature.
How to set fan speed and details on automatic mode.
Instructions to stop the unit and explanations of different operating modes.
Guide for setting basic ON/OFF and programmed timers.
Procedures for cancelling timers and modifying settings.
Instructions for activating and configuring the sleep timer.
Explanation of how the sleep timer modifies settings.
How to adjust the vertical louvers using the remote control.
Manual adjustment of horizontal louvers and related safety notes.
Steps to start and stop the automatic swing function.
Using the main unit controls when the remote is unavailable.
Instructions for cleaning the main indoor unit and preparing for non-use.
Recommendation for regular professional maintenance and inspections.
Step-by-step guide to cleaning the intake grille.
How to clean and replace the air filter.
Information on using the optional air cleaning filter.
Addresses immediate operation, noise, smells, and mist.
Covers weak airflow, mist, and specific operational symptoms.
Covers poor cooling, control issues, and items to check before service.
Addresses persistent problems and malfunction warnings.
Recommended operating ranges for optimal performance and potential issues.
Lists model details, capacity, power, and refrigerant.
