To Next PageTo Next Page
Need help?Do you have a question about the Friedrich S S 08 and is the answer not in the manual?
General| BTU | 8, 000 |
|---|---|
| Cooling Capacity (BTU/h) | 8, 000 |
| Voltage | 115V |
| Refrigerant Type | R-410A |
| Operating Range (Cooling) | 90°F |
| Filter Type | Washable |
Explains the safety alert symbol, WARNING, and CAUTION terms used in the manual.
Warns about handling the high-pressure refrigeration system and using correct service equipment.
Ensures correct electrical connection, prohibits adapters/extension cords, and details LCDI cord test.
Describes the LCD display, power controls, and button functions for operation.
Explains remote control, FriedrichLink adapter, 24-hour timer, and energy management schedules.
Guides through selecting operating modes and adjusting fan settings.
Details how to select, set timer/schedule functions, and set current time.
Explains how to switch temperature units and adjust display brightness.
Explains alert indicators and how to lock/unlock the control panel.
Explains SMART/Wi-Fi icons and how to select Timer/Schedule modes.
Step-by-step guide to set the desired start and stop times for the timer function.
Describes icon behavior when timer/schedule is active, blocked, or during ON/OFF scenarios.
Illustrates unit behavior when Timer or Schedule modes are activated or deactivated.
Explains how deactivating these functions affects unit operation and indicators.
Covers setup, operation, and detailed button functions of the remote control.
Explains how to adjust louvers and control fresh air intake or exhaust.
Details electrical safety, wiring, receptacle compatibility, and lists recommended installation tools.
Lists and describes hardware parts for window and through-the-wall installations.
Instructions for removing the unit chassis from cabinet and initial preparation steps.
Details on positioning the cabinet, sill plate, and attaching support brackets.
Instructions for measuring, cutting, and fitting wingboard panels for window sealing.
Steps for installing gaskets and inserting the chassis into the cabinet.
A caution regarding sharp edges and the use of protective gloves during handling.
Describes cord routing options and securing the front panel.
Steps to access the control panel and adjust the cord strain relief.
Instructions for reinstalling the panel and securing the power cord.
References initial steps and covers wall thickness and opening construction.
Details cabinet insertion and securing the unit to the wall structure.
Ensures proper installation and covers heat pump specific operation.
Step-by-step guide for replacing the backup battery in the control panel.
Details on cleaning filters, coils, chassis, decorative front, and fan motor.
Provides resources for resolving issues, including contact numbers and website.
Lists optional accessories like drain kits, carbon filters, and adapters.
Addresses common causes like unplugged cords, tripped breakers, or power failures.
Covers breaker/fuse tripping, LCDI cord trips, and related solutions.
Covers issues like low capacity, incorrect sizing, and longer run times for high-efficiency units.
Details warranty terms for parts, refrigerant system, and lists exclusions and limitations.
