EasyManuals Logo

Friedrich Uni-Fit US12C10 User Manual

Friedrich Uni-Fit US12C10
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
—21
MUMIXAMMUMINIMGNITAR ETALP EMAN
V5.621V5.301V511
V352V781V032/802
YDEMERESUACTNIALPMOC
Check voltage. See the limits on the preceding.
page. If not within limits, call an electrician.
Check the wire connections, if loose, repair or
replace the terminal. If wires are off, refer to wiring
diagram for identification, and replace. Check wire
locations. If not per wiring diagram, correct.
Check the capacitor.
Replace if not within ±10% of manufacturers
rating. Replace if shorted, open, or damaged.
Check the compressor for open circuit or
ground. If open or grounded, replace the
compressor.
Check the compressor overload, if externally
mounted. Replace if open. (If the compressor
temperature is high, remove the overload, cool it,
and retest.)
Voltage
Wiring
Capacitor (Discharge
capacitor before
servicing.)
Compressor
Overload
Compressor will not run,
but fan motor runs.
ROOM AIR CONDITIONER VOLTAGE LIMITS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Friedrich Uni-Fit US12C10 and is the answer not in the manual?

Friedrich Uni-Fit US12C10 Specifications

General IconGeneral
BrandFriedrich
ModelUni-Fit US12C10
CategoryAir Conditioner
LanguageEnglish

Related product manuals