Friedrich Wallmaster WCT08A10A - Page 20

20 PB
MENU RETURN
MENU RETURN
OPERATION
User Interface
The TM Menu (Timer) continued
Auto mode selected. See Figure 313.
Set the cool setpoint for your rst timer period using the arrow buttons. The cooling mode timer only sets the cool setpoint.
See Figure 314.
Next, set the heat setpoint for your rst timer period. The heating mode timer only sets the heat setpoint. See Figure 315.
Note: The auto mode timer sets both the cool and heat setpoint.
Set the time to start the rst timer period. See Figure 316.
Figure 313
Figure 314
MENU RETURN
Figure 315
Figure 316
MENU RETURN