Frigidaire 100 series User Manual

4
Operating Instructions
Vent
Latch
Getting Started
1. Load dishwasher (See Preparing and
Loading Dishes).
2. Add detergent (See Dishwasher Dispenser
& Detergents).
3. Add rinse aid, if needed (See Rinse Aid).
4. Turn dial clockwise to select cycle (See
Cycle Chart).
5. Select desired energy OPTIONS (See
Energy Options).
6. Run hot water faucet nearest dishwasher
until water is hot. Turn water off.
7. To start, close door to latch.
Very Important Information
Read Before Operating Your
Dishwasher!
Normal Operating
Sounds
This dishwasher does not sound like most
dishwashersITS QUIETER!
The new wash system uses energy efficient
motors for the wash and drain portions of
the cycle you select. Each cycle has a series of
water fills and drains for washing and
rinsing dishes. As each cycle begins, you
mayor may nothear the drain motor.
The next sound you will hear is the
splashing water as it enters the tub. Then the
lower arm rotates and circulates water. This
is followed by a pause and a slightly different
sound as the upper arm sprays water. If you
listen closely, you will hear the change in
sound as the wash action switches from one
arm to the other.
PLEASE BE ADVISED: If you compare this
dishwasher to previous models, you may
be surprised at what you DONT hear!

Frigidaire 100 series Specifications

General

Brand	Frigidaire
Model	100 series
Category	Dishwasher
Language	English