To Next PageTo Next Page
Need help?Do you have a question about the Frigidaire CFMV154CLSA and is the answer not in the manual?
General| Capacity | 1.5 cu. ft. |
|---|---|
| Wattage | 1000 Watts |
| Color | Stainless Steel |
| Turntable | Yes |
| Preset Cooking Programs | Yes |
| Power Levels | 10 |
| Child Lock | Yes |
| Defrost Function | Yes |
| Timer | Yes |
| Voltage | 120V |
| Control Type | Electronic |
| Turntable Diameter | 12 inches |
| Type | Over-the-Range Microwave |
Instructions for unpacking the microwave and detaching the mounting plate from the packaging.
Guide on how to locate wall studs to ensure secure mounting of the plate.
How to determine the correct height and position for the mounting plate under different cabinet types.
Steps for accurately positioning and marking the wall plate using templates and measurements.
Instructions for venting the microwave exhaust upwards through a vertical duct.
Instructions for venting the microwave exhaust horizontally through the rear wall.
Steps for setting up the microwave to recirculate air without external venting.
Steps for securely attaching the mounting plate to the wall using toggle and wood bolts.
How to use the template to prepare the top cabinet for mounting hardware and cord.
Instructions for reconfiguring the microwave's blower unit for top exhaust ventilation.
Procedure to ensure the exhaust damper functions correctly before final installation.
Steps for physically lifting and securing the microwave oven to the prepared mounting plate and cabinet.
How to position and adjust the exhaust adaptor to connect with the house ductwork.
Steps for connecting the microwave's exhaust duct to the home's ventilation system.
How to cut an opening in the rear wall according to the template for back exhaust.
Instructions for removing the blower plate to access and reconfigure the blower unit.
Steps for securely attaching the mounting plate to the wall for back exhaust installations.
Using the template to prepare the top cabinet for mounting hardware and the power cord.
How to reconfigure the microwave's blower unit for outside back exhaust ventilation.
Steps for lifting and securing the microwave oven to the prepared mounting plate and cabinet.
Steps for attaching the mounting plate to the wall for recirculating installations.
Using the template to prepare the top cabinet for mounting hardware and the power cord.
Verifying that the blower plate is correctly installed on the unit.
Steps for lifting and securing the microwave oven to the prepared mounting plate and cabinet.
Instructions for installing or replacing the charcoal filter for recirculating air.
