To Next PageTo Next Page
Need help?Do you have a question about the Frigidaire CFMV16 and is the answer not in the manual?
General| Capacity | 1.6 cu. ft. |
|---|---|
| Power | 1000 Watts |
| Turntable | Yes |
| Sensor Cooking | Yes |
| Convection | No |
| Preset Cooking Programs | Yes |
| Power Levels | 10 |
| Child Safety Lock | Yes |
| Display Type | Digital |
| Control Type | Electronic |
| Color | Stainless Steel |
| Defrost Options | Yes |
Crucial safety guidelines and precautions for installation and use of the microwave oven.
Details the necessary voltage, amperage, and circuit specifications for the microwave installation.
Procedures for handling and reporting any damage incurred during shipment or installation.
Lists all hardware and components provided with the microwave for installation.
Specifies the required tools for a successful and safe installation of the microwave.
Defines the necessary clearance and dimensions for installing the microwave oven.
Instructions on finding wall studs and determining the correct location for the mounting plate.
Details procedures for different ventilation types: top exhaust, back exhaust, and recirculating.
Securing the mounting plate to the wall using toggle bolts and ensuring it is properly aligned.
Drilling holes in the top cabinet for support screws and the power cord, using a template.
Reorienting the blower unit and attaching the exhaust adaptor for top exhaust ventilation.
Ensuring the damper is removed and pivots freely before mounting the microwave.
Lifting and securing the microwave oven to the mounting plate and top cabinet.
Positioning the exhaust adaptor to connect properly with the house ductwork.
Extending and sealing the house duct to the exhaust adaptor for proper ventilation.
Cutting an opening in the rear wall for the outside exhaust, using a template.
Removing the blower plate from the microwave to access the blower unit.
Securing the mounting plate to the wall using toggle bolts, ensuring alignment with studs.
Drilling holes in the top cabinet for support screws and the power cord, using a template.
Reorienting the blower unit and rerouting wires for back exhaust ventilation.
Lifting and securing the microwave oven to the mounting plate and top cabinet.
Securing the mounting plate to the wall using toggle bolts and ensuring proper alignment.
Drilling holes in the top cabinet for support screws and the power cord, using a template.
Ensuring the blower plate is correctly installed on the microwave unit.
Lifting and securing the microwave oven to the mounting plate and top cabinet.
Steps for replacing or installing a charcoal filter for recirculating models.
Ensuring the microwave has been installed according to instructions before initial use.
Recommends reading the companion Use & Care Manual for operational guidance.
Advises retaining installation instructions for the local inspector's reference.
Instructions to complete the product registration card for warranty purposes.
