To Next PageTo Next Page
Need help?Do you have a question about the Frigidaire CFMV164LSA and is the answer not in the manual?
General| Brand | Frigidaire |
|---|---|
| Model | CFMV164LSA |
| Category | Microwave Oven |
| Language | English |
Steps to safely unbox the microwave and detach the mounting plate from the packaging.
Methods for identifying wall studs to ensure secure mounting of the microwave.
Guide to positioning the wall plate correctly based on cabinet type and measurements.
Instructions for precisely aligning the wall plate template for drilling and mounting.
Example of a ductwork configuration for top exhaust ventilation with calculations.
Example of a ductwork configuration for back exhaust ventilation with calculations.
Securely fasten the mounting plate to the wall for top exhaust setup.
Drill holes in the top cabinet using a template for top exhaust installation.
Reconfigure the microwave blower unit for proper top exhaust ventilation.
Verify that the exhaust damper functions correctly for optimal venting.
Safely lift and secure the microwave oven to the mounting plate and cabinet.
Align and connect the exhaust adaptor to the house ductwork for top exhaust.
Finalize the exhaust system by connecting the ductwork to the adaptor.
Cut an opening in the rear wall to accommodate the horizontal exhaust vent.
Detach the blower plate as part of the reconfiguration for back exhaust.
Securely fasten the mounting plate to the wall for back exhaust setup.
Drill holes in the top cabinet using a template for back exhaust installation.
Reconfigure the microwave blower unit for proper back exhaust ventilation.
Safely lift and secure the microwave oven to the mounting plate and cabinet.
Securely fasten the mounting plate to the wall for the recirculating setup.
Drill holes in the top cabinet using a template for recirculating installation.
Ensure the blower plate is correctly installed on the unit for recirculating.
Safely lift and secure the microwave oven to the mounting plate and cabinet.
Guide to replacing or installing the charcoal filter for recirculating air.
