17
BEFORE SETTING OVEN CONTROLS
Effortless™ Oven Rack System
Some models are equipped with a special oven rack
system that automatically extends the oven rack to assist in
access to your food items. This rack extends when the oven
door is opened or closed (Figure 18 below).
Remove all oven racks and accessories before starting a
self clean cycle. If the oven racks are left in the oven
during the self clean cycle, the gliding ability of the Effort-
less™ Oven Rack system will be damaged, and oven
racks will loose their shiny finish and may turn blue.
Remove all oven racks and clean according to instruc-
tions provided in “Care and Cleaning” beginning on
page 37.
Make sure the oven and oven racks are completely cool
before attempting to assemble or disassemble the Effort-
less™ Oven Rack system. Never pick up hot oven racks
or parts.
Figure 18: Effortless™ oven rack
oven
rack
connector
arm
open oven
door
connector
arm
The Effortless™ Oven Rack system can be used in oven
rack positions 1, 2, or 3 (Figure 19, below). Placing any
oven rack in any other position will prevent the oven door
from fully closing and may damage the oven door, oven
cavity, or the door connector brackets.
Do not attempt to use the Effortless™ Oven rack in rack
positions 4 or 5.
Figure 19: Rack positions
To Next Page
Loading...
