Frigidaire EFIC237 User Manual (English)

Questions and Answers:

T
Thomas HernandezJul 25, 2025
Why is my Frigidaire EFIC237 Ice Maker making ice too slowly?
- G
  gallowaykathyJul 25, 2025
  Your Frigidaire Ice Maker might be producing ice slowly due to several reasons. Ensure that the hot air outlet has at least 15 cm of ventilation space. The water temperature in the inner tank should be between 44.6°F and 89.6°F. If these steps don't resolve the issue, it is possible that the refrigeration system has malfunctioned, requiring verification by a qualified technician.
K
kathychangJul 31, 2025
What to do if my Frigidaire Ice Maker is leaking water?
- B
  Bruce MeyerJul 31, 2025
  If your Frigidaire Ice Maker is leaking water, check the drain plug to ensure it's properly in place. If the leakage continues, a pipe joint within the appliance might be loose, or the seal may have reached the end of its service life. In such cases, it's best to have a qualified technician verify the appliance.
E
Elizabeth StewartAug 6, 2025
How to fix “Add Water” indicator on Frigidaire Ice Maker?
- M
  millerpatriciaAug 6, 2025
  If the “Add Water” indicator lights up on your Frigidaire Ice Maker, it means the unit lacks water. To resolve this, stop the ice maker, add water, and then press the “ICE”/“CLEAN” button again to restart the unit.
J
James DodsonAug 13, 2025
What to do if the “Ice-Full” indicator lights up on my Frigidaire EFIC237 Ice Maker?
- K
  Kristen CaldwellAug 13, 2025
  If the “Ice-Full” indicator is illuminated on your Frigidaire Ice Maker, it could mean one of two things. First, there might actually be too much ice, so you should remove some ice cubes. Alternatively, if there's no ice inside, there may be an obstruction. Remove any obstacles or clean the inside wall of the ice storage. You can also press and hold the ice making button for 5 seconds to forcibly cancel full ice and restart ice making for 80 minutes.
M
Matthew BrownAug 18, 2025
Why is the power indicator flashing on my Frigidaire EFIC237?
- K
  Kelsey RichardsonAug 18, 2025
  The “Power” indicator and ICE icon flashing on your Frigidaire Ice Maker can indicate several issues. The ambient or water temperature may be too high, so ensure the ice maker operates below 90 degrees Fahrenheit and use colder water. It could also indicate a refrigerant liquid leakage. Try pressing the ICE button twice to restart the ice making program and wait for 50 minutes; if the problem persists, have a qualified technician check it. Other potential causes could be a broken cover motor or a blocked pipe in the cooling system.