Frigidaire FAA074S7AA - User Manual

|nstallation instructions
READ BEFORE iNSTALLiNG UNiT
MS II Window Mounting
Your air conditioner is designed to install in standard
double hung windows with opening widths of 23 to 36
inches (584 mm to 914 mm) (FIG. 1)
Lower sash must open sufficiently to allow a clear vertical
opening of 14 inches (356 mm). Side louvers and the
rear of the AC must have clear air space to allow
enough airflow through the condenser, for heat removal.
The rear of the unit must be outdoors, not inside a
building or garage.
Fig. 1
EXTERIOR
NOTE: SAVE CARTON and these INSTALLATION
INSTRUCTIONS for future reference. The carton is the
best way to store unit during winter, or when not in use.
Some assembly is required. Please read these instructions
carefully.
,f
Mounting Hardware
3/4" screws
lock flame
sash lock
TOOLS NEEDED:
• PhillipsScrewDriver
, Drill(Ifpilotholesareneeded)
NOTE: DO NOT USE ANY SCREWS OTHER THAN
THOSE SPECIFIED HERE
When handling unit, be careful to avoid cuts
from sharp metal edges and aluminum fins on
front and rear coils.
Before installing unit, the top rail must be
assembled on the unit.
Top Rail Hardware Qty.
3/8" Screw 4
Top Rail l
TOOL NEEDED:
, Phillips Screwdriver
Top
Rail
A. Remove the air
conditioner from the
carton and place on a
fiat surface. Packaging
B. Remove top rail from
the rear of the
packaging material as
shown in Fig. A
C°
D,
Align the hole in the
top rail with those in
the top of the unit as
shown in Fig. B
Secure the top rail to
the unit with the 3/8"
Screws as shown in
Fig. C
NOTE: FOR SAFETY REASONS, ALL
FOUR (4) SCREWS MUST BE SECURELY
FASTENED.
P/N 2020213A0322

Summary

Installation Instructions

MS II Window Mounting

Instructions for mounting the MS II air conditioner in a standard double hung window.

CAUTION

Top Rail Assembly

Top Rail Hardware

Lists the screws and quantities required for attaching the top rail.

Tools Needed for Top Rail

Specifies the Phillips screwdriver as the necessary tool for top rail assembly.

Mounting Hardware

Lists the screws and locks needed for securing the air conditioner unit.

Tools Needed for Mounting

Lists the Phillips screwdriver and drill for the installation process.

How to Install

Installing Window Filler Panels

Instructions for attaching the left and right window filler panels to the unit.

Placing Unit in Window

Guide on carefully placing the air conditioner unit into the window opening.

Extending Side Panels

Instructions on extending the side panels to fit the window frame.

Securing the Unit

Securing Frame Lock and Sill

How to attach the frame lock to the window sill using screws.

Securing to Window Sash

Instructions for securing the unit to the window sash with screws.

Securing Lower Sash

Attaching the sash lock to secure the lower sash in place.

Sealing the Window

If AC is Blocked by Storm Window

Storm Window Obstruction Solution

Recommends adding wood or removing the storm window if it blocks the AC.

Removing AC From Window

Frigidaire FAA074S7AA Specifications

General

Brand	Frigidaire
Model	FAA074S7AA
Category	Air Conditioner
Language	English