Frigidaire FAA087P7A User Manual

1
Installation Instructions
READ BEFORE INSTALLING UNIT
MS II Window Mounting
Your air conditioner is designed to install in standard
double hung windows with opening widths of 23 to 36
inches (584 mm to 914 mm) (FIG. 1)
Lower sash must open sufficiently to allow a clear vertical
opening of 14-1/2 inches (368 mm). Side louvers and the
rear of the AC must have clear air space to allow
enough airflow through the condenser, for heat removal.
The rear of the unit must be outdoors, not inside a
building or garage.
TOOLS NEEDED:
Phillips Screw Driver
Drill (If pilot holes are needed)
Qty.
3/4"screws 7
lock frame 2
sash lock 1
Mounting Hardware
When handling unit, be careful to avoid cuts
from sharp metal edges and aluminum fins on
front and rear coils.
Some assembly is required. Please read these instructions
carefully.
TOOL NEEDED:
Phillips Screwdriver
A. Remove the air
conditioner from the
carton and place on a
flat surface.
B. Remove top rail from
the bottom of the
packaging material as
shown in Fig. A
C. Align the hole in the
top rail with those in
the top of the unit as
shown in Fig. B
D. Secure the top rail to
the unit with the 3/8"
Screws as shown in
Fig. C
Top Rail Hardware Qty.
3/8” Screw 4
Top Rail 1
CAUTION
NOTE: FOR SAFETY REASONS, ALL
FOUR (4) SCREWS
MUST BE SECURELY
FASTENED.
Before installing unit, the top rail must be
assembled on the unit.
Packaging
Fig. A
Top Rail
Fig. B
Fig. C
SZ000354(En) 10/21/2004, 10:43 AM1
NOTE:
SAVE CARTON and these INSTALLATION
INSTRUCTIONS for future reference. The carton is the
best way to store unit during winter, or when not in use.

Frigidaire FAA087P7A Specifications

General

Brand	Frigidaire
Model	FAA087P7A
Category	Air Conditioner
Language	English

Summary

Installation Instructions

MS II Window Mounting

Instructions for mounting the MS II air conditioner in a double hung window.

Top Rail Assembly

Steps to assemble the top rail onto the air conditioner unit using provided hardware.

Mounting Hardware

Lists necessary hardware and tools for securing the air conditioner.

How to Install

Installing Side Panels

Guide for attaching and securing the accordion-style side filler panels.

Placing Unit in Window

Procedure for positioning the air conditioner into the window opening.

Extending Side Panels

Instruction on extending side panels to fit the window frame.

Securing the Unit

Frame Lock Installation

Details on installing the frame lock and securing screws into the window sill.

Sash Lock Installation

How to attach the right angle sash lock to secure the lower sash.

Foam Seal Installation

Procedure for inserting foam seal between upper and lower window sashes.

Troubleshooting and Removal

AC Blocked by Storm Window

Solutions for installing the AC when a storm window obstructs it.

Removing AC From Window

Steps for safely disconnecting and removing the air conditioner.