EasyManua.ls Logo

Frigidaire FAC124P1A User Manual

Frigidaire FAC124P1A
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
THIS AIR CONDITIONER IS EQUIPPED WITH A NEW INDUSTRY
STANDARD POWER SUPPLY CORD WITH A TEST-RESET FUNCTION
READ AND SAVE THESE INSTRUCTIONS
MULTi-STEP SPEED ELECTRONIC CONTROL
P/N 220201d011
Question and Answer IconNeed help?

Do you have a question about the Frigidaire FAC124P1A and is the answer not in the manual?

Frigidaire FAC124P1A Specifications

General IconGeneral
BrandFrigidaire
ModelFAC124P1A
CategoryAir Conditioner
LanguageEnglish

Summary

Air Conditioner Warranty

Important Safety Instructions

For Your Safety

Advises against storing flammable liquids nearby and reading product labels for warnings.

Prevent Accidents

Lists precautions like ensuring adequate electrical service and secure installation.

Electrical Information

Emphasizes proper grounding, using the correct receptacle, and avoiding extension cords.

Operation of Current Device

Air Conditioner Features

Care and Cleaning

Air Filter Cleaning

Details how to check, clean, or vacuum the air filter to maintain efficiency and prevent frost.

Avoid Service Checklist

Air conditioner will not operate

Lists potential causes like unplugged cord, tripped device, or OFF control, and their solutions.

Air from unit does not feel cold enough

Covers issues like low temperature settings, dirty filters, or compressor delays.

Room Too Warm with Ice Formation

Addresses ice on coils due to low outdoor temp or dirty filters, suggesting defrosting.

Room Too Warm without Ice Formation

Points to high temperature settings or blocked airflow as causes for insufficient cooling.

Rapid Cycling On/Off

Suggests checking for dirty filters or improper airflow blockage as reasons for rapid cycling.

Unusual Noise

Normalizes some sounds but suggests slower fan settings for loudness or checking installation for vibration.

Internal Water Dripping

Attributes internal dripping to improper installation tilt or high humidity, advising checks.

External Water Dripping

Explains outside dripping is normal in humid conditions or due to large moisture removal.

Remote Sensing Deactivating Prematurely

Addresses remote sensing problems like out-of-range or obstructed signals, suggesting relocation.

Room Too Cold

Suggests increasing the set temperature or relocating the remote sensor if applicable.

Related product manuals