Frigidaire FAM187Q2A3 - User Manual

Installation Instructions
For Hea ry Duty (FAS Models) and
Median (FAM Models) Air Conditioners
Please read ALL instructions before installing. Two people are
recommended to install this product. If a new electrical outlet
is required, have the outlet installed by a qualified electrician
before installing unit. See#5 in Preliminary Instructions
following.
Preliminary Instructions
Do the following before starting to install unit. See illustrations
below.
Check dimensions of your unit to determine model type:
Hea D" duty (FAS) Median (FAJVI)
Unit Height: 18 5/8" 17 5/8"
Unit Width: 26 1/2,, 23 V£'
Min. Window Opening: 19" 18 V2"
Min. Window Width: 31" 26 V2"
Max. Window Width: 43" 40 V£'
I. Check window opening size - the mountingparts furnished
with this air conditioner are made to install in a wooden
sill double-hung window. The standard parts are for
window dimensions listed above. Open sash to a minimum
of !9"(483mm). (FIG. 1)
2. Check condition of window - all wood parts of window
must be in good shape and able to firmly hold the needed
screws. If not, make repairs before installing unit.
FIG. 1
q 9" M_N.
STORM WINDOW FRAME OR
OTHER OBSTRUCTION
_LI _LL ANGLE
3. Checkyour storm windows -if your stotlnwindc_w
frame does not allow the clearance required, correct by
adding a piece of wood as shown in FIG. 2, or by removing
stom_window while room air conditioner is being installed.
(continued)
19" MtN_
!_" MIN 11 1/2" MIN,
.................?
] _-n-- [ BOARD THICKNESS AS
I L../-/--/< REQUIRED,ALONG
] - -v" " ENTIRE STOOL. FASTEN
STORM WINDOVV FRAME OR WITH TWO NAILS OR
OTHER OBSTRUCTION SCREWS.
P/N 220218A008

Summary

Window Mounting

Thru-The-Wall Installation

Select Wall Location

Choose a wall location considering codes, structural loads, utilities, electrical access, and airflow.

Prepare Wall for Frame Construction

Locate stud, cut holes, measure between studs. Build a wooden frame matching model's inside dimensions.

Prepare and Install Cabinet

Slide chassis from cabinet. Place cabinet in opening, position for slope. Secure bottom rail to wood frame.

Masonry Construction

Cut or Build Wall Opening

Create a masonry opening similar to frame construction. For thickness > 8-1/2", refer to Thru-the-Wall Step 2.

Secure Cabinet in Place

Use masonry nails/anchors or a 2x4 frame. Ensure the frame is securely anchored to the masonry opening.

Install Lintel and Brackets

Install a lintel to support the wall above. Fasten cabinet using existing or drilled holes. Install exterior brackets.

Complete Masonry Installation

Frigidaire FAM187Q2A3 Specifications

General

Type	Window Air Conditioner
Cooling Capacity	18, 000 BTU
Noise Level	60 dB (High Fan)
Power Cord Length	6 ft
Refrigerant	R-410A
Voltage	208/230V
Operating Voltage	230/208V
Operating Current	8.5 A
EER	9.0