Frigidaire FFFU14F2QW User Manual

6
FIRST STEPS
Lid Removal (chest models)
See Instructions on hinge label. Unplug the unit.
Door Removal (upright models)
If door must be removed, unplug the unit.
1. Gently lay the unit on its back, on a rug
or blanket.
2. Remove 2 base screws and base panel.
3. Remove wire from clips on bottom of
cabinet if required.
4. Unplug connector, if required, by holding
the cabinet connector in place, and pulling
door connector out.
5. Remove bottom hinge screws.
6. Remove plastic top hinge cover.
7. Remove screws from top hinge.
8. Remove top hinge from cabinet.
9. Remove door and bottom hinge
from cabinet.
10. To replace door, reverse the above order
and securely tighten all screws to prevent
hinge slippage.
Base Panel
Screws
Hinge Screws
Wire
Cabinet Connector
Base
Panel
Door Connector
Clips
3. Once the inside surface snaps in place,
continue the process by rolling the handle
clip slightly outward and pressing down
rmly to snap onto the outside surface. If
installed incorrectly, the handle clip will not
lay at.

Frigidaire FFFU14F2QW Specifications

General

Type	upright
Style	freestanding
Color	white
Total Capacity	13.8 cubic feet
Temperature	-10 to 10°f
Defrost System	frost free
Quick Freeze	yes
Shelves Type	built-in
Number of Shelves	3
Temperature Alarm	no
Temperature Control	electromechanical
Interior Light	yes
Ice Maker	no
Child Lock	yes
Smart Home	no
Annual Energy Consumption	436 kilowatt hours

Weight and Dimensions

Depth	27 1/2 inches
Height	61 3/4 inches
Width	29 5/8 inches
Net Weight	159 pounds