16
OPTIONAL FEATURES
Shelf Adjustment
Refrigerator shelves are easily adjusted to suit
individual needs. Before adjusting the shelves,
remove all food.
To adjust sliding shelves:
1. Remove shelf by pulling forward to stop
position.
2. Lift front edge up and pull out.
To replace shelf, rest side edges on any pair
of shelf rails and carefully push shelf back into
position.
Sliding Glass Shelf
Sliding Wire Shelf Door Rack
Door storage
Door bins, shelves, and racks are provided for
convenient storage of jars, bottles, and cans.
Frequentlyuseditemscanbequicklyselected.
The dairy compartment, which is warmer than
the general food storage section, is intended for
short term storage of cheese, spreads, or butter.
Door rack
Some models have door racks or bins that can
accommodate gallon-sized plastic drink containers
and economy-sized jars and containers.
To remove door rack:
1. Push on rack sides to release from locking tabs.
2. Pull straight out.
To install door rack:
1. Push rack straight ahead.
2. You will hear the sides lock into the tabs.
1
2
Slide-Under/Flip Shelf
To adjust slide-under/ip shelf:
1. Pull shelf forward until the back of the
shelf drops down, then gently push shelf
back and under.
2. Liftfrontofshelftoipitupwardstoward
the back of the cabinet.
CAUTION
Do not clean glass shelves or covers with
warm water when they are cold. Shelves
and covers may break if exposed to sudden
temperature changes or impact, such as
bumping. Tempered glass is designed to
shatter into many small, pebble-size pieces.
This is normal. Glass shelves and covers are
heavy. Use both hands when removing them
to avoid dropping.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
