To Next PageTo Next Page
Need help?Do you have a question about the Frigidaire FGMV153CLBA and is the answer not in the manual?
General| Type | Over-the-Range Microwave |
|---|---|
| Capacity | 1.5 cu. ft. |
| Power | 1000 watts |
| Color | Black |
| Sensor Cooking | Yes |
| Defrost Function | Yes |
| Child Lock | Yes |
| Voltage | 120V |
| Ventilation | 300 CFM |
| Control Type | Electronic |
| Cooking Levels | 10 |
| Dimensions | 29.875" W x 15.875" H x 15.5" D |
| Exterior Dimensions | 29.875" W x 15.875" H x 15.5" D |
Lists the hardware components included in the installation kit.
Lists other essential parts provided with the appliance for installation.
Instructions for safely unpacking the microwave and detaching the mounting plate.
Guide on locating wall studs for secure mounting plate installation.
How to find the correct position for the mounting plate beneath different cabinet types.
Steps to properly position and mark holes for the wall mounting plate.
Summary of the steps involved in installing the outside top exhaust ventilation.
Detailed steps for securely attaching the mounting plate to the wall for top exhaust.
Using the template to prepare the top cabinet for installation.
Modifying the microwave's blower for proper outward top exhaust.
Verifying the correct functioning of the exhaust damper.
Steps for physically lifting and attaching the microwave oven to the mounting plate.
Aligning the exhaust adaptor to connect with the house ductwork.
Finalizing the connection of the exhaust duct to the appliance.
Overview of the steps for installing the outside back exhaust ventilation.
Instructions for cutting an opening in the rear wall for exhaust.
Steps to remove the blower plate from the microwave.
Securing the mounting plate to the wall for back exhaust installation.
Using the template to prepare the top cabinet for installation.
Modifying the blower for proper outward back exhaust.
Steps for lifting and attaching the microwave oven to the mounting plate.
Overview of steps for recirculating ventilation setup.
Securing the mounting plate for recirculating installation.
Preparing the top cabinet using a template for recirculating installation.
Verifying the correct installation of the blower plate.
Steps for lifting and attaching the microwave oven to the cabinet.
How to install or replace the charcoal filter in recirculating models.
