EasyManuals Logo

Frigidaire FPID2498SF User Manual

Frigidaire FPID2498SF
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
CAUTION
Winterizing
A dishwasher left in an unheated place should be
protected from freezing. Have a qualifi ed person
do the following:
To Disconnect Service:
1. Turn off electrical power to the dishwasher
at the supply source by removing fuses or
tripping circuit breaker.
2. Shut off water supply.
3. Place a pan under the inlet valve. Disconnect
water line from the inlet valve and drain into
pan.
4. Disconnect drain line from pump and drain
water into pan.
To Restore Service:
1. Reconnect the water, drain, and electrical
power supply.
2. Turn on water and electrical power supply
3. Fill detergent cup and run the dishwasher
through a HEAVY cycle.
4. Check connections to make sure they do not
leak.
Property Damage Hazard
17
BEFORE YOU CALL
NOTE
See Installation Instructions for more details
on disconnecting and restoring service to your
dishwasher.
ë
Before calling for service, review this list.
It may save you both time and expense.
This list includes common experiences that
are not the result of defective workmanship
or material in your dishwasher.
Food Soils Left on Dishes
Choose another cycle for longer washing
time.
Choose the Hi-Temp Wash option.
Check rack loading section for proper
loading-avoid nesting items.
Home water pressure may be too low -
should be 20 to 120 pounds per square inch
(psi).
Check incoming water temperature. It
should be at least 120
o
F (49
o
C). (See Factors
Affecting Performance.)
Check water hardness. For extremely hard
water, it may be necessary to install a water
softener. (See Detergent Chart).
Use Fresh Detergent.
Make sure items are not blocking the spray
arms, preventing them from rotating.
Select heat dry option.
Make sure the rinse aid dispenser is fi lled.
Increase the discharge setting of rinse aid.
(See Rinse Aid).
Check the incoming water temperature. Be
sure it is at least 120
o
F (49
o
C).
Check for proper loading-avoid nesting
items.
Plastic items may need to be towel dried.
Cups with a concave bottom will collect
water. Load them at the far left of the
upper rack so they will be held in a tilted
position.
Dishes not Dry
Freezing temperatures may cause water
lines to rupture. Be sure all supply lines to
and circulating lines within dishwasher are
protected.
Failure to do so could result in property
damage.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Frigidaire FPID2498SF and is the answer not in the manual?

Frigidaire FPID2498SF Specifications

General IconGeneral
Stylebuilt-in dishwashers
Colorstainless steel
Load Capacity14
Number of Cycles7
Options/Settingsfeatures a variety of cleaning solutions like sanitize to help kill germs, rinse only to keep food from sticking to plates, and powerplus™ to clean crusty dishes with dried-on food
Drying Typeheated drying
Noise level47 decibels adjusted
Control Typebutton
Delay Startyes
Child Lockyes
Load Sensoryes
Number of Racks3
Cycle Signalyes
Food Disposeryes
Sanitize Settingsyes
Annual Energy Consumption260 kilowatt hours
Water Consumption Per Cycle8 gallons
Voltage120 volts
Current15 amperes
Weight and Dimensions IconWeight and Dimensions
Depth24.25 inches
Height33.75 inches
Width23.75 inches
Net Weight99.75 pounds

Related product manuals