To Next PageTo Next Page
Need help?Do you have a question about the Frigidaire FRS095YC1 and is the answer not in the manual?
General| Type | Window Air Conditioner |
|---|---|
| Cooling Capacity | 9, 500 BTU |
| Refrigerant | R-410A |
| Voltage | 115V |
| Operating Frequency | 60 Hz |
| Fan Speeds | 3 |
| Noise Level (High) | 56 dB |
| Filter Type | Washable |
| Thermostat | Electronic |
| Remote Control | Yes |
| Installation Type | Window |
| Weight | 62 lbs |
Detailed steps and precautions for performing correct flaring work on refrigerant pipes to prevent leaks.
Instructions for aligning pipes and tightening flare nuts with specified torque values.
Key regulations for safe electrical installation, including grounding, circuit protection, and voltage compliance.
Procedure for connecting the power and control cables to the indoor unit, including wire specifications.
Schematics showing terminal block connections for various indoor unit models.
Steps to connect cables to the outdoor unit's electrical board, ensuring proper routing and insulation.
Important checks before powering on, including individual circuits, screw tightness, and voltage.
Explanation of why air purging is necessary and its effects on system performance.
Detailed instructions for using a vacuum pump to evacuate the system and remove non-condensables.
Procedures for checking insulated resistance, grounding, and electrical leakage.
Steps to perform test operation, including selecting modes and checking functionality.
Methods for detecting refrigerant leaks using soap water or a leak detector.
Details on how to operate the air conditioner using the remote control, including modes and settings.
Lists common causes for reduced performance and their potential solutions.
Identifies reasons why the unit may not start and suggests checks.
