To Next PageTo Next Page
Need help?Do you have a question about the Frigidaire FRS12PYC1 and is the answer not in the manual?
General| BTU | 12000 |
|---|---|
| Operating Voltage | 115V |
| Operating Frequency | 60 Hz |
| Cooling Amps | 10.8 A |
| Type | Window |
| Cooling Capacity | 12000 BTU/h |
Lists critical warnings about installation, servicing, and handling to prevent severe injury or death.
Lists warnings to prevent minor injury, unit damage, or property damage during operation and maintenance.
General warnings and requirements for installation, emphasizing professional installation and code adherence.
Lists specific site types that may cause problems or require consultation with a distributor.
Details on ideal placement, clearance, and environmental considerations for the indoor unit.
Details on optimal placement, ventilation, and protection for the outdoor unit.
Provides dimensions and diagrams for installing the indoor unit mounting plate for different capacities.
Instructions on how to securely attach the indoor unit's installation plate to the wall.
Guidance on drilling the correct hole for refrigerant pipes, ensuring proper tilt.
Details on connecting pipes and setting up the drain hose for the indoor unit.
Instructions on how to properly hang and secure the indoor unit onto the installed plate.
Guides on bundling and insulating refrigerant pipes, cables, and drain hoses.
Instructions on anchoring the outdoor unit securely to a mount.
Details on how to connect the drain pipe for condensate removal from the outdoor unit.
Explains the procedure for correctly flaring copper pipes to prevent refrigerant leaks.
Details on aligning pipes and tightening flare nuts with specific torque values.
Outlines safety rules and requirements for electrical installation.
Describes the connection of power and control cables between units.
Step-by-step guide for connecting the electrical cable to the indoor unit.
Step-by-step guide for connecting the electrical cable to the outdoor unit.
Provides important warnings and checks for wiring and power supply after installation.
Explains the importance of removing air and moisture from the refrigeration system.
Table detailing refrigerant amounts based on pipe length and unit capacity.
Warning regarding the correct operation of packed valves on the outdoor unit.
Describes methods for detecting refrigerant leaks using soap water or a leak detector.
Notes on operating conditions, humidity, and louver settings for optimal performance.
