Malfunction display and solutions
When the washer is in trouble, please contact local service office or the sales
service department of our company and the customer should not dismantle the
machine without permission.
If the washer can not work normally, and the abnormal indication is shown in the
display tube window or the machine alarms, please check and correct as
follows.
Abnormal display and alarm of the washer
When the washer is in trouble, please contact local service office or the sales
service department of our company and the customer should not dismantle the
machine without permission.
If the washer can not work normally, and the abnormal indication is shown in the
display window or the machine alarms, please check and correct as follows.
48
47
Alarm of water intaking or
making up over 1 hour.
spin do not meet the front
door alarm.
Alarm for water level sensor.
Electronic door lock
malfunction.
*Flickering simultaneously.
On Off
Alarm for shocking in the
same spin process third
times.
Child Lock light flashes.
DrainageTime ≥ 6min Water
Level switch is not reset.
Check the water tap is
opened or not.
Closed the door.
Replace Water Level sensor.
Check door lock.
Please keep the clothes
balance.
Communication failure.
Door switch effectively, check
drain valve.
DISPLAY*
CAUSE SOLUTION
Alarm of water intaking or
making up over 1 hour.
Drainage Time≥6min Water
Level switch is not reset.
spin do not meet the
front door alarm.
Alarm for shocking in the same
spin process third times.
Alarm for water level sensor.
When the communication failure.
Alarm for the lock of the door
is broken.
E1
E2
E3
E4
F8
F6
Fd
Check the water tap is
opened or not.
Door switch effectively,
check drain valve.
Closed the door.
Please keep the clothes
balance.
Replace Water Level sensor.
Re-allocation of the
communication terminal plug.
Check door lock.
DISPLAY
CAUSES METHODS
ENG
ENG
To Next Page
Loading...
Need help?
General
