Frigidaire GAS COOKTOP

To Next Page

GAS COOKTOP INSTALLATION INSTRUCTIONS

INSTALLATION AND SERVICE MUST BE PERFORMED BY

A QUALIFIED INSTALLER.

IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE.

READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

If the information in this manual is not followed exactly, a ﬁre or explosion may result

causing property damage, personal injury or death.

FOR YOUR SAFETY:

— Do not store or use gasoline or other ﬂammable vapors and liquids in the vicinity of this or any other

appliance.

— WHAT TO DO IF YOU SMELL GAS:

• Donottrytolightanyappliance.

• Donottouchanyelectricalswitch;donotuseanyphoneinyourbuilding.

• Immediatelycallyourgassupplierfromaneighbor'sphone.Followthegassupplier'sinstructions.

• Ifyoucannotreachyourgassupplier,calltheredepartment.

— Installation and service must be performed by a qualiﬁed installer, service agency or the gas supplier.

Cooktop Dimensions

Cooktop Cutout Dimensions

30" Min.

NOTE: Wiring diagrams for these appliances are enclosed in this booklet.

P/N 318201452 (1302) Rev. H

English – pages 1-10

Español – páginas 11-22

Wiring Diagram - pages 24

Printed in Canada

Figure 1

MODEL A. LENGTH B. WIDTH C. DEPTH

CUTOUT DIMENSIONS

D. LENGTH E. WIDTH

Min. Max. Min. Max.

26" Model 25 ¾" 21 9/16" 3 ½" 25" 25" 20 ½" 20 ½"

30" Model 30" 21 ½" 3 1/8" 26 5/8" 26 7/8" 19" 19 3/8"

36" Model 36" 18 5/8" 3 ¼" 34 ¼" 34 3/8" 16 5/8" 16 ¾"

Need help?

Do you have a question about the Frigidaire GAS COOKTOP and is the answer not in the manual?

Summary

1. Wall Outlet Location

2. Secure the Unit

2.1. Release the Burners

Procedure to release burner pans and burner box screws for installation.

3. Provide an Adequate Gas Supply

4. Connection to gas

5. LP;Propane Gas Conversion

5. A. Pressure Regulator Conversion

Steps to convert the pressure regulator from Natural Gas to LP Gas and vice-versa.

5. B. Burner Valves Conversion

Procedure to convert burner valves for LP Gas or Natural Gas by adjusting orifices.

6. Adjustments

6. A. Top Pilots Adjustment

Steps to adjust pilot flames for proper ignition and flame height.

6. B. Burner Air Shutter Adjustment

Adjusting air shutters for optimal burner air intake and flame quality.

6. C. Burner Flame Adjustment

Guidance on achieving proper burner flame characteristics (blue cones, steadiness).

7. Connect Electricity to Gas Cooktop

8. Check Operation