EasyManua.ls Logo

Frigidaire GLET1031CS0 User Manual

Frigidaire GLET1031CS0
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation
Instructions
Full Size Laundry Center
Gas & Electric
Before beginning installation, carefully read these instructions. This will simplify the installation
and ensure the laundry center is installed correctly and safely. Leave these instructions near the
laundry center after installation for future reference.
NOTE: The electrical service to the laundry center must conform with local codes and ordinances
and the latest edition of the National Electrical Code, ANSI/NFPA 70, or in Canada, the Canadian
Electrical Code, CSA C22.1
NOTE: The gas service to the laundry center must conform with local codes and ordinances and
the latest edition of the National Fuel Gas Code ANSI Z223.1/NFPA 54, or in Canada, the Canadian
Natural Gas and Propane Installation Code, CSA B149. 1.
NOTE: The laundry center is designed under ANSI Z21.5.1 or ANSI/UL 2158- CAN/CSA C22.2
(latest edition) for HOME USE only. This laundry center is not recommended for commercial
applications such as restaurants or beauty salons, etc.
For your safety the information in
this manual must be followed to minimize the risk
of fire or explosion or to prevent property damage,
personal injury or loss of life.
- Do not store or use gasoline or other flammable
vapors and liquid in the vicinity of this or any
other appliance.
- WHAT TO DO IF YOU SMELL GAS
e Do not try to light any appliance.
t Do not touch any electrical switch; do not use
any phone in your building.
e Clear the room, building or area of all
occupants.
e Immediately call your gas supplier from a
neighbor's phone. Follow the gas supplier's
instructions.
e If you cannot reach your gas supplier, call the
fire department.
Installation and service must be preformed by a
qualified installer, service agency or the gas
supplier.
Contents
SUBJECT PAGE
Pre-lnstallation Requirements
Electrical Requirements
Water Supply Requirements
Drain Requirements
Exhaust System Requirements
Gas Supply Requirements
Location
Mobile Home Installation
Rough-In Dimensions
Unpacking
Electrical Installation
Grounding Requirements
3 & 4-Wire Connections
Installation
Replacement Parts
2
2
2
2
3
4
4
4
5
5
6
6
7
7
8
Printed in U,S,A. P/N131661700 (O11O)
Question and Answer IconNeed help?

Do you have a question about the Frigidaire GLET1031CS0 and is the answer not in the manual?

Frigidaire GLET1031CS0 Specifications

General IconGeneral
BrandFrigidaire
ModelGLET1031CS0
TypeWasher/Dryer Combo
Capacity2.0 cu. ft.
ColorSilver
Wash Cycles8
Drying MethodVented
Control TypeElectronic
Number of Cycles8
Energy Star CertifiedYes
Voltage120 V
Width24 inches

Summary

Pre-Installation Requirements

Electrical Requirements

Specifies voltage, amperage, and circuit requirements for electrical connections.

Water Supply Requirements

Details required water pressure, temperature, and faucet types for proper hookup.

Drain Requirements

Outlines standpipe diameter, height, and flow rate for the drainage system.

Exhaust System Requirements

Exhaust Duct Lengths and Turns

Provides maximum lengths for rigid and flexible metal ducting based on turns.

Exhaust System Safety Warnings

Highlights critical safety warnings regarding duct material, placement, and obstructions.

Gas Supply, Location, and Mobile Home Installation

Gas Supply Requirements

Details pipe size, material, shutoff valves, and testing for gas supply connections.

Location and Ventilation Guidelines

Covers suitable installation locations and ventilation needs, including for closets.

Mobile Home Installation Specifics

Specifies exhaust and make-up air requirements for mobile home installations.

Dimensions and Unpacking Procedures

Rough-In Dimensions Overview

Diagram showing critical measurements for installation space.

Unpacking and Shipping Restraint Removal

Instructions for removing shipping restraints and preparing the unit.

Electrical Installation and Grounding

Electrical Installation Safety Warnings

Critical warnings about extension cords, aluminum wiring, and proper connection.

Grounding Requirements

Details proper grounding procedures for North American and Canadian installations.

Electrical Connections

3-Wire System Electrical Connections

Step-by-step guide for connecting a 3-wire power cord.

4-Wire System Electrical Connections

Step-by-step guide for connecting a 4-wire power cord.

Installation and Final Setup

Water Inlet Hose Connection

Instructions for connecting water inlet hoses and checking for leaks.

Leveling the Laundry Center

Procedure for ensuring the unit is level and stable on its legs.

Gas Connection and Operational Checks

Gas Connection Procedure

Details connecting the gas supply line and performing leak tests.

Initial Operation and Safety Checks

Covers exhaust connection, power plug-in, and pre-operation safety checks.

Gas Burner Lighting and Troubleshooting

Explains initial lighting process and troubleshooting for gas dryers.

Replacement Parts Information

Related product manuals