Frigidaire GLTF2940ES0 User Manual

Full Size Tumble Action Washers
Before beginning installation, carefully read these instructions_ This will simplify the
installation and ensure the washer is installed correctly and safely. Leave these instructions
near the washer after installation for future references
NOTE: The electrical service to the washer must conform with local codes and ordinances
and the latest edition of the Nadonal Electrical Code, ANSMNFPA 70_
For your safety the information in
this manual must be followed to minimize the risk
of fire or explosion or to prevent property damage,
personal injury or loss of life.
- Do not store or use gasoline or other flammable
vapors and liquid in the vicinity of this or any
other appliance.
- WHAT TO DO tF YOU SMELL GAS
. Do not try to light any appliance.
. Do not touch any electrical switch; do not
use any phone in your building.
. Clear the room, building or area of all
occupants.
. immediately call your gas supplier from a
neighbor's phone. Follow the gas suppliers
instructions.
. if you cannot reach your gas supplier, call
the fire department.
installation and service must be performed by a
qualified installer, service agency or the gas
supplier.
Printed in U.S.A.
Contents
SUBJECT PAGE
Prednstallation Requirements 2
Electrical Requirements 2
Grounding Requirements 2
Water Supply Requirements 2
Drain Requirements 2
Roughdn Dimensions 3
Location Of Your Washer 4
Unpacking 4
Installation 4-6
Replacement Parts 6
P/N 134374600A (0411)

Frigidaire GLTF2940ES0 Specifications

General

Brand	Frigidaire
Model	GLTF2940ES0
Type	Top Load Washer
Color	White
Energy Star Certified	Yes
Wash Action	Agitator
Control Type	Electronic
Voltage	120V
Frequency	60Hz
Delay Start	Yes
Child Lock	Yes

Summary

Pre-Installation Requirements

Electrical Requirements

Details power supply, circuit, and outlet requirements for safe operation.

Grounding Requirements

Explains the necessity and method of grounding the washer to prevent electrical shock.

Water Supply Requirements

Specifies faucet type, pressure, and temperature for water connections.

Drain Requirements

Outlines the necessary drain pipe size, height, and flow rate.

Rough-In Dimensions

Location of Your Washer

Do Not Install Your Washer

Lists unsuitable locations to avoid damage, fire, or malfunction.

Important Minimum Installation Clearances

Defines required space around the washer for ventilation and access.

Unpacking

Installation

Replacement Parts