Frigidaire GLTF2940ES3 User Manual

PN 134726400A (0601)
WASHER OPERATING INSTRUCTIONS
• If desired, add liquid chlorine bleach and liquid fabric
softener to the appropriate compartments.
• Slowly close the dispenser drawer. Closing the
drawer too quickly could result in early dispensing
of bleach or fabric softener.
• Any water remaining in the dispenser at the end of
the cycle is a result of siphoning action and part of
normal operation.
6. Select the appropriate cycle and settings for the load.
• Turn the Cycle Selector knob to select the cycle.
The estimated time will be displayed.
• Suitable wash and rinse water temperatures, final
spin speed, options and soil level for each cycle will
automatically be displayed.
• To change the settings, press the TEMP, SPIN and
SOIL buttons. To provide the best care for your
laundry, not every temperature, spin speed, option
and soil level is available with every cycle. If a setting
is not available, its indicator will not light.
• To select or delete an option, press OPTIONS, then,
while the indicator is blinking, press Select. The
indicator will light when the option has been
selected. It will no longer be lighted when the option
has been deleted.
• Adjustments to the cycle will be remembered each
time that cycle is selected in the future. See the
Cycle Selections chart for factory settings.
7. Select Delay Start to delay the beginning of the cycle
for up to 12 hours. The delay time selected will be
displayed as 30, 60 or 90 minutes or 2 through 12 hrs.
Before Operating Your Washer
Read your washer Owner’s Guide. It has important safety
and warranty information. It also has many suggestions
for best washing results.
To reduce the risk of fire, electric shock or
injury to persons, read the IMPORTANT SAFETY
INSTRUCTIONS in your washer Owner’s Guide before
operating this appliance.
Operating Steps
Read and follow “Washing Procedures” in your Owner’s
Guide. It provides detailed information for preparing the
wash load and choosing control settings to ensure best
washing results.
1. Sort laundry into loads that can be washed together.
2. Prepare items for washing.
3. Pretreat stains and heavy soil.
4. Add laundry load to the wash drum.
5. Add laundry products to the dispenser.
• Detergent, bleach and fabric softener will be
dispensed at the proper time in the cycle.
• Slide safety latch to the right to open the dispenser
drawer.
• Add the recommended amount of a high
efficiency detergent to the detergent
compartment.
8. Start the washer.
• Close the door and press START. The washer will
not operate with the door open. The status lights will
blink, the signal will beep and “dr” will be displayed
as a reminder to close the door.
• As a safety measure, the door will automatically
lock during the entire wash cycle and the Door
Lock indicator will be lighted.
• A forgotten item can be added to the wash drum.
Press Pause/Cancel once. “PAU“ will be displayed
alternately with the estimated cycle time. Open the
door, add the item, close the door and press START
to resume the cycle.
• If the cycle is interrupted during spin, it will take
approximately 2-3 minutes for the door lock to
release. DO NOT force open the door.
• To stop the washer, press Pause/Cancel twice.
9. A signal will sound when the Cycle Signal option is
selected. Remove items from the washer when the
cycle ends.
Cycle Selection
Turn the Cycle Selector knob to the desired cycle. For best
results, follow the fabric care label instructions on items to
be washed. To change the selection
after the cycle has
begun, press Pause/Cancel twice. Just turning the knob
to another selection will not change the cycle. The signal
will beep and the status lights will flash but the original
cycle will continue.

Frigidaire GLTF2940ES3 Specifications

General

Brand	Frigidaire
Model	GLTF2940ES3
Type	Top Load Washer
Loading Type	Top Load
Energy Star Certified	Yes
Spin Speed	700 RPM
Wash Cycles	12
Agitator	Yes
Color	White
Number of Wash Cycles	12
Water Level Settings	5
Voltage	120V
Frequency	60 Hz
Width	27 in
Depth	27 inches

Summary

Washer Operating Instructions Overview

Before Operating Your Washer

Read the Owner's Guide for safety, warranty, and washing suggestions.

Operating Steps

Follow detailed steps for preparing loads and selecting controls for best washing results.

Cycle Selection Guide

Instructions on how to select wash cycles and understand estimated times.

Detailed Cycle Descriptions

Heavy Cycle

16 minutes of reversing tumble wash for heavily soiled, sturdy items with 3 rinses.

Normal Cycle

13 minutes of reversing tumble wash for normally soiled loads, followed by 3 rinses.

Perm Press Cycle

10 minutes of reversing tumble wash for cottons/blends with a no-iron finish.

Quick Cycle

5 minutes of reversing tumble wash for lightly soiled items needing quick laundering.

Delicate Cycle

10 minutes of gentle reversing wash action for knits and delicates, followed by 3 rinses.

Handwash Cycle

10 minutes of occasional tumbling for items labeled "Hand Washable".

Silk Cycle

6 minutes of gentle reversing tumble wash in cold water for washable silk items.

Wool Cycle

10 minutes of occasional tumbling for washable wool items with 3 rinses.

Sport Cycle

For light soil/perspiration on synthetics; includes soak, wash, and rinse phases.

Bulky Cycle

10 minutes normal wash for bulky items like comforters, followed by gentle tumbling.

Soak Cycle

For heavily soiled/stained items; involves soaking before a short wash cycle.

Touch Up Cycle

Refreshes items not soiled, like garments from luggage or storage.

Drain/Spin Cycle

Used to drain water from the washer and spin out the load.

Rinse/Spin Cycle

Provides a cold water rinse or fabric softener addition.

Washer Cycle Settings

Wash and Rinse Water Temperatures

Guidance on selecting water temperatures based on fabric type, colorfastness, and soil level.

Auto Temperature Control

Improves washing performance by regulating water temperature settings.

Final Spin Speed

Explanation of High, Medium, and Low spin speeds for water extraction.

Soil Level

Option to increase wash time for heavily soiled loads.

Water Level

Washer automatically adjusts water level to load size and type.

Cycle Options

Details on selecting or deleting options like Press Saver, Extra Rinse, Extra Spin, and Cycle Signal.

Delay Start

Allows scheduling the wash cycle to begin later, up to 12 hours in advance.

Control Lock

Prevents accidental operation by locking control buttons.

Estimated Time Display

Shows the total cycle time, which may adjust based on load conditions.

Status Lights

Indicators for Door Lock, Wash, Rinse, Final Spin, and Control Lock states.

Cycle Selections Chart

Cycle Durations and Settings Availability

Chart detailing estimated cycle durations, temperatures, speeds, and options for each wash cycle.