Frigidaire GLTF1240AS0 User Manual

10. Start the washer by closing the door and
pulling out the cycle selector knob. The
washer will not operate with the door open.
As a safety measure, the door will
automatically lock during the entire wash
cycle. When the door is closed, the Door Lock
Indicator lights up when the washer starts, and
turns off at the end of the cycle.
 To stop the washer, push in the cycle
selector knob.
 To change a cycle, push in the cycle
selector knob and turn it clockwise to the
desired setting.
 Pull out the knob to restart the washer.
11. Remove items when cycle ends. A signal
will sound at the end of the cycle when the
Cycle Signal ON is selected.
3. Pretreat stains and heavy soil.
4. Add laundry load to the wash drum.
5. Open the dispenser drawer and add the
measured amount of detergent to the
detergent compartment. If desired, add liquid
bleach and fabric softener to the appropriate
compartments. Slowly close dispenser drawer.
The washer will not operate with the drawer
open.
6. Set Temperatures switch according to fabric
type and soil level of each load.
7. If desired, select Extra Rinse in Whites/Regular,
Colors/Perm Press, or Delicates cycle.
8. Select Final Spin Speed as desired.
9. Push in the cycle selector knob and turn it
clockwise to the desired wash cycle and
setting.
Before Operating Your Washer
Read your washer Use and Care Guide. It has
important safety and warranty information. It also
has many suggestions for best washing results.
To reduce the risk of fire, electric shock,
or injury to persons, read the IMPORTANT SAFETY
INSTRUCTIONS in your washer Use and Care Guide
before operating this appliance.
Operating Steps
Read and follow Washing Procedures in your Use
and Care Guide. It provides detailed information for
preparing the wash load and choosing control
settings to ensure best washing results.
1. Sort laundry into loads that can be washed
together.
2. Prepare items for washing.
Printed in U. S. A.
Note: From time to time you may see water in
the bleach and fabric softener compartments.
This is a result of the siphoning action and is
part of the normal operation of the washer.
P/N 134071500 (0107)
OPERATING INSTRUCTIONS
NORMAL
CYCLE SIGNAL
OFF
ON
FAST
WHITES/
COLORS/

Frigidaire GLTF1240AS0 Specifications

General

Brand	Frigidaire
Model	GLTF1240AS0
Category	Washer
Language	English

Summary

Operating Instructions

Before Operating Your Washer

Provides essential information and safety warnings before using the washing machine.

Operating Steps

Detailed steps for loading, selecting settings, starting, and completing a wash cycle.

Cycle Selection

Whites/Regular Cycle

For most fabrics, offering up to 18 minutes of reversing tumble action with multiple rinses and spins.

Short Wash Cycle

A time and water saving cycle with up to 6 minutes of reversing tumble action for very lightly soiled fabrics.

Colors/Perm Press Cycle

For cottons and blends with a no-iron finish, providing up to 13 minutes of reversing tumble action.

Knits and Delicates Cycle

Offers gentle care with up to 10 minutes of tumble action for knit, delicate, and hand washable items.

Controls

Temperature Settings

Determines water temperatures for washing and rinsing based on fabric type and soil level.

Cycle Signal

Provides an audible signal at the end of the cycle when activated.

Precision Temp Control

Regulates warm and cold wash water temperatures for optimal detergent performance.

Extra Rinse Option

Allows for an additional rinse cycle to remove excess dirt and detergent from loads.

Final Spin Speed

Offers options for NORMAL or FAST spin speeds to increase water extraction and reduce drying time.