Bake-n-Warm TM Double Oven Light Operation (some models):
The Bake-n-Warm TM DouMe Oven Hghtoperates with the upper
oven Hghtand automatically turns ON when the upper oven
door is opened, Ufequipped, the Bake-n-Warm TM DouMe Oven
Hght may aUsobe manually operated by pressing the @ pad,
To Remove the Bake-n-
Warm TM Double Oven Drawer
& Replace the Oven Light:
1, Before drawer removaU,be sure to
turn OFF the BakeonoWarm TM
DoubUeOven and Uetthe drawer area
2, PuUUthe drawer away from the oven,
Using a phiUUipsoheadscrewd river
remove the two drawer screws from
the insides of the front oven drawer
compartment (See Fig, 1),
3, With one hand hoUdthe drawer front
in pUace, Use your other hand to puUU
the guideaway from the oven (See
Fig, 2) untiUthe guide hook
disengages (See Fig, 3),
4, Repeat from step 3 above for the
other side of the drawer, Fig. 1
5, With BOTH glide hooks
disengaged, carefully lift the drawer
up and away from the oven, Push
both drawer glides into lower oven
cavity,
6, Replace the lower oven light with a
40 Watt Appliance light bulb (Refer
to Fig,5),
Be sure the range is unplugged and all parts
are COOL before replacing oven light, Weara leather-faced
glove for protection against possible broken glass,
To replace Bake-n-Warm TM Double Oven
Drawer:
1, Pull both drawer glides and fully extend outward from
Ioweroven cavity,
2. Carefully rest the drawer on top of both glides,
3, Adjust the drawer position on top of the rails until both of
the drawer side slots are correctly engaged with the glide
hooks (See Fig, 4),
4, Pull the drawer forward to line up the drawer with both
screw holes in the glides, Using a phillips-head
screwdriver replace the two screws removed from the
innerdrawersides,
5, Replace drawer rack if removed,
6, CIoselowerovendrawer,
Glide Hook Disengaged
Fig, 3
Fig. 2
Fig. 5
GBideHook Engaged
Fig. 4
31