To Next PageTo Next Page
Need help?Do you have a question about the Frigidaire LFMV1846VFA and is the answer not in the manual?
General| Appliance Category | Microwave Oven |
|---|---|
| Capacity | 1.8 cu. ft. |
| Power | 1000 Watts |
| Color | Stainless Steel |
| Turntable | Yes |
| Sensor Cooking | Yes |
| Convection | No |
| Preset Cooking Programs | Yes |
| Power Levels | 10 |
| Child Lock | Yes |
| Defrost Function | Yes |
| Timer | Yes |
| Voltage | 120V |
| Control Type | Electronic |
| Ventilation | Vent Fan |
Essential preparatory steps and important initial considerations before starting the installation process.
Critical safety precautions for installation, including grounding, mounting, and handling the appliance.
Details on voltage, frequency, amperage, and circuit requirements for safe and proper electrical connection.
Guidelines for reporting and handling damage that occurs during shipment or installation.
List of hardware and additional parts included with the microwave oven for installation.
List of all tools required for the installation process, including screwdrivers, drills, and measuring tools.
Diagram and specifications detailing the required clearances and dimensions for installing the microwave.
Steps for safely removing the mounting plate from its packaging and preparing it for use.
Methods for locating wall studs using a stud finder or hammer to ensure secure plate attachment.
Instructions for positioning the mounting plate under a flat-bottomed cabinet, ensuring correct alignment.
Guidance for positioning the mounting plate under a framed recessed cabinet for optimal fit.
Instructions for positioning the mounting plate with front overhang, ensuring the unit remains level.
Steps for drawing reference lines and drilling pilot holes for securing the wall mounting plate.
Overview of the recirculating installation method, suitable for non-ducted environments.
Overview of the outside back exhaust method for horizontal ducting of ventilation.
Overview of the outside top exhaust method for vertical ducting of ventilation.
Detailed instructions on securely attaching the mounting plate to the wall using toggle bolts and screws.
Steps for preparing the top cabinet by drilling holes for screws and the power cord using a template.
Procedure to check if the blower plate is correctly installed on the microwave unit.
Instructions for lifting, tilting, and securing the microwave oven to the mounting plate and cabinet.
Continuing the process of securing the microwave oven to the top cabinet with screws.
Procedure for installing or replacing the charcoal filter for odor reduction in recirculating mode.
Guidelines on total duct length and a chart to calculate equivalent lengths of various duct components.
An example calculation of total duct length for an outside top exhaust (vertical duct) installation.
An example calculation of total duct length for an outside back exhaust (horizontal duct) installation.
Instructions for cutting an opening in the rear wall to accommodate the external exhaust duct.
Procedure for removing the blower plate from the microwave to access and adjust the blower unit.
Steps for securely attaching the mounting plate to the wall using toggle bolts and screws.
Instructions for preparing the top cabinet by drilling holes for screws and the power cord.
Detailed steps to remove, reorient, and reinstall the blower unit for back exhaust ventilation.
Finishing the blower unit reorientation, wire routing, and securing it for back exhaust installation.
Instructions for lifting, tilting, and securing the microwave oven to the mounting plate and cabinet.
Steps for securely attaching the mounting plate to the wall using toggle bolts and screws.
Instructions for preparing the top cabinet by drilling holes for screws, power cord, and exhaust cutout.
Steps to reorient the blower unit by rotating it 90 degrees for top exhaust ventilation.
Securing the blower unit and replacing the blower plate after reorientation for top exhaust.
Verifying that the damper is removed and pivots freely before and after microwave installation.
Instructions for lifting, tilting, and securing the microwave oven to the mounting plate and cabinet.
Completing the mounting of the microwave oven by securing it to the top cabinet with screws.
Positioning the exhaust adaptor to connect properly with the house ductwork for top exhaust.
Extending and sealing the house duct to the exhaust adaptor using appropriate high-temperature tape.
Essential checks and final setup procedures before operating the microwave oven.
