To Next PageTo Next Page
Need help?Do you have a question about the Frigidaire MWV150KWA and is the answer not in the manual?
General| Capacity | 1.5 cu. ft. |
|---|---|
| Wattage | 1000 watts |
| Color | White |
| Control Type | Electronic Touch |
| Child Lock | Yes |
| Type | Microwave Oven |
| Cooking Modes | Defrost, Reheat |
Key preliminary information including safety notes and installer skill level.
Crucial safety precautions for installation and operation to prevent hazards.
Details on voltage, frequency, amperage, and wiring for safe electrical connection.
Procedures for handling and reporting damage during shipping or installation.
List of hardware and additional parts provided with the microwave for installation.
List of necessary tools for proper mounting and installation of the microwave.
Specifications for cabinet dimensions and clearances for microwave installation.
Instructions for positioning and aligning the wall mounting plate.
Methods to locate wall studs for secure mounting plate installation.
Guidance on positioning the mounting plate based on cabinet type.
Instructions for correctly positioning and marking the wall plate for drilling.
Instructions for venting exhaust upwards through a vertical duct.
Instructions for venting exhaust horizontally through a back duct.
Steps for installing the microwave without external ductwork, recirculating air.
Example calculation of equivalent duct length for top exhaust installations.
Example calculation of equivalent duct length for back exhaust installations.
Limits and calculations for total ductwork length to ensure proper airflow.
Securing the mounting plate to the wall using toggle bolts and screws.
Drilling holes in the top cabinet using the provided template.
Reconfiguring the blower unit for upward exhaust.
Ensuring the damper moves freely before mounting the oven.
Steps for lifting, hooking, and securing the microwave to the mounting plate.
Positioning the exhaust adaptor for connection to the house duct.
Extending and sealing the exhaust duct to the adaptor.
Cutting an opening in the rear wall according to the template.
Safely detaching the blower plate from the microwave.
Securing the mounting plate to the wall using toggle bolts and screws.
Drilling holes in the top cabinet using the provided template.
Reconfiguring the blower unit for rear exhaust.
Lifting, hooking, and securing the microwave to the mounting plate.
Securing the mounting plate to the wall using toggle bolts and screws.
Drilling holes in the top cabinet using the provided template.
Verifying the blower plate is correctly installed on the unit.
Lifting, hooking, and securing the microwave to the mounting plate.
Final steps before operating the microwave, including checks and registration.
