To Next PageTo Next Page
Need help?Do you have a question about the Frigidaire MWV150KBA and is the answer not in the manual?
General| Type | Countertop |
|---|---|
| Capacity | 1.5 cu. ft. |
| Power | 1000 Watts |
| Control Type | Electronic |
| Color | Black |
| Cooking Presets | Yes |
| Sensor Cooking | Yes |
| Defrost Function | Yes |
| Child Lock | Yes |
| Warranty | 1 Year Limited |
Critical safety precautions for installation and operation.
Specifications for voltage, frequency, and circuit connections.
Procedures for units damaged during shipment or installation.
Lists of hardware and additional parts provided with the microwave.
List of necessary tools for performing the installation.
Dimensions and clearances required for installing the microwave.
Steps to unbox the microwave and detach the mounting plate.
Methods to find wall studs for secure mounting of the plate.
How to position the mounting plate based on cabinet type.
Steps to correctly position and mark the wall plate on the wall.
Instructions for venting the microwave upwards through a vertical duct.
Instructions for venting the microwave horizontally through the back.
Instructions for venting air back into the room without ductwork.
Secure the mounting plate to the wall using toggle bolts and screws.
Drill holes in the top cabinet using the template.
Reconfigure the blower unit for the top exhaust setup.
Verify the damper mechanism moves freely before mounting.
Lift and securely attach the microwave to the mounting plate.
Position the exhaust adaptor to align with the house duct.
Connect the house exhaust duct to the adaptor and seal.
Cut an opening in the rear wall for exhaust venting.
Remove the blower plate from the microwave oven.
Secure the mounting plate to the wall with bolts.
Drill holes in the top cabinet using the template.
Reconfigure the blower unit for the back exhaust setup.
Complete blower unit adjustments for back exhaust.
Lift and securely attach the microwave to the mounting plate.
Secure the mounting plate to the wall using toggle bolts and screws.
Drill holes in the top cabinet using the template.
Ensure the blower plate is correctly installed on the unit.
Lift and securely attach the microwave to the mounting plate.
Ensure the microwave oven has been installed according to instructions.
Clear all packing debris from the microwave oven.
Place the turntable components inside the oven cavity.
Replace house fuse or turn circuit breaker back on.
Plug the power cord into a dedicated 15-20 amp outlet.
Familiarize yourself with the appliance's operation and care.
Retain instructions for the local inspector's reference.
Fill out and return the product registration card.
