Installation Instructions
TOOLS YOU WILL NEED
# 1 Phillipsscrewdriver
Tin snips (for cutting
damper, if required)
Gloves
Safetygoggles
Pencil
Ruler or tape measure and
t edge
Scissors
(to cut template, if necessary)
Saw (saber,hole or keyhole)
Electric drill with 3/16",1/2"and %"
drill bits
0
Stud finder or
Hammer (optional)
Level
Carpentersquare
(optional)
Fillerblocksor scrap
woodpieces,if needed
for top cabinetspacing
(usedonrecessedbottom
cabinetinstallationsonly)
Duct and masking tape
MOUNTING SPACE
66" (167,6cm)
or Morefrom
the Floorto the
Topof the
Microwave
_lash
BottomEdgeof
CabinetNeedsto
be30" (76,2cm)
or Morefrom the
CookingSurface
NOTES:
• The space between the cabinets must be
30" (76.2 cm)wide and free of obstructions.
• If you are going to vent your microwave oven
to the outside, see Hood Exhaust Section for
exhaust duct preparation.
• When installing the microwave oven beneath
smooth, flat cabinets, be careful to follow the
instructions on the top cabinet template for
power cord clearance.
5
To Next Page
Loading...
