Setting Oven Controls
Setting Bake
The BAKE tpad controls normal baking. The oven can be programmed to bake at any temperature from 170 ° F to
550 ° F (The sample shown below is for 375°F).
INSTRUCTIONS
To set the Bake Temperature to 375°F
1. Arrange interior oven racks and place food in oven.
2. Press ), "350 °" will appear and "BAKE" will flash in the
display (Figure 1). If a bake of 350°F is needed, press _.
3. Press (.3,,) (,,7) (`5) (Figure 2). "BAKE" will continue to flash and
"375 °" will appear in the display.
4. Press O The display will show "375 °'' and "BAKE" (Figure 3).
A beep will sound once the oven temperature reaches 375° F.
Pressing (_o_") will cancel the Bake feature at any time.
To change the Bake Temperature (example: changing
from 375°F to 425°F)
1. After the oven has already been set to bake at 375°F and the
,
oven temperature needs to be changed to 425°F, press
(Figure 4). "375 °'' will appear and "BAKE" will flash in the
display.
Press _ _ _ (Figure 5). "BAKE" will continue to flash and
"425 °" will appear in the display.
3. Press "BAKE" and "425 °'' will stay in the display (Figure 6).
Note: If the oven was recently heated from prior cooking and has
remained heated, the bake element symbol may not show in the
display immediately,
Note: Electric mode/s only, during the first rise of temperature, the
convection fan and convection element will be activated to allow the
oven to reach its target temperature faster, The Bake and Broil
elements will also cycle for a better heat distribution,
PRESS DISPLAY
®GG
©
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
To Next Page
Loading...
