FRIGOGLASS ICOOL 40/150 C - Additional Faults and Noise; First Aid Measures

ENG
22
FAULT POSSIBLE REASONS HANDLING
The ICM does not
cool.
The door does not seal properly.
Repair the doors for proper closing
(this type of repair should be
performed by an authorised
technician).
Leakage in the cooling system.
Repair the leakage (this type of repair
should be performed by an authorised
technician).
The ICM makes
noise.
Intense metallic noise. Call a Service technician.
Inclined or not even floor.
Level the ICM properly by adjusting its
feet. Placing a spirit level on the top of
the ICM will assist you in levelling it.
There is water on
the floor.
The drainage hole for the condensate
water is blocked.
Unblock the drainage hole.
There is a leakage in the tray. Call a Service technician.
The lights don’t
work.
The lighting or the transformer are out of
order
Call a Service technician.
If after all the above-mentioned checks the problem with your ICM remains, contact the customer
service department of your supplier and provide the following information:
• Type of ICM
• Serial number of the ICM
• Brief description of the problem / observation
12. First aid
In case of accident, it is recommended:
ACCIDENT IMMEDIATE ACTION
Inhalation of refrigerant Take deep breaths of clean air. If irritation persists, contact a doctor.
Contact with eyes
Wash your eyes thoroughly with plenty of water for at least 15 minutes
and then consult a doctor.
Contact with skin
Wash immediately with water.
13. Disposal of the unit and packaging
For detailed information regarding the recycling of this product and its packaging, please contact your
local city office, your waste disposal service or the manufacturer through its service agent. By ensuring
this product and its packaging is disposed of properly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise incur by this product’s
and packaging inappropriate disposal.