To Next PageTo Next Page
Need help?Do you have a question about the FRIGOMAR CU50VFD and is the answer not in the manual?
Product type and system overview.
Inspect all cartons and packages for damages during transport. Remove shipping cartons.
Guidance on transporting the machine using M6 screws and eyebolts for safe operation.
Warnings about electrical work, grounding, and using qualified personnel.
Details on fixing the machine using 4 holes 9x20mm on the base.
Visual representation of wiring diagrams and terminal board.
Explains terminal block connections for ground, neutral, line, and various functions.
Instructions on unit installation, clearance, airflow, and bonding system.
Lists available digital inputs for remote control functions like ON/OFF, SEASON, ECO.
Recommended water pipe sizes for circulation and seawater connections.
Check electrical connections annually, clean and repair as necessary.
Safety rules for fan coil installation and operation, avoiding hazardous locations.
Unit tested for safety, electronic control for optimum performance.
Overview of the digital display, showing parameters and status indicators.
Navigating menu settings, including Running status, T status, unit selection, and alarms.
Displays SSPM temperature, EEV steps, frequency set/real, and gas superheating.
Shows temperatures for water inlets/outlets and gas discharge/suction.
Option to select measurement units (°C or °F) for displayed values.
Lists occurred alarms with date and time, and provides descriptions for specific alarms.
Access to clock settings, installer parameters, service parameters, and force to work options.
Instructions for setting the date and time using a calculator input window.
Explains compressor frequency regulation based on delta temperature for cooling and heating.
Warranty terms for Frigomar products, covering defects in materials or workmanship.
Details warranty coverage period, starting from possession date or installation date.
Conditions for warranty intervention, including prior authorization and authorized service.
Disposal of equipment and parts must comply with waste disposal and recycling laws.
Operation for refrigerant recovery must be performed by qualified personnel.
General