What to do if Frima Grill has no water in the hand spray?
If there's no water in the hand spray of your Frima Grill, first, ensure the water supply tap is turned on. Then, remove the water supply pipe and check the appliance's protective filter for blockages. If blocked, clean the filter.
What to do if Frima VarioCooking Center 112T will not start and the screen is black?
If your Frima Grill won't start and the screen remains black, check the safety chain, specifically the F1/F2 fuses, the Tank overheating Klixon circuit breaker, the T1-F1/T1-F2 Transformer fuses, and the F17>F22 Klixon circuit breaker.
What to do if there is no automatic water distribution in Frima VarioCooking Center 112T?
If there is no automatic water distribution in your Frima Grill, check if water is available in the hand spray. Also, determine whether the appliance is in demonstration mode.
General| Category | Grill |
|---|---|
| Model | 112T |
| Power Supply | Electric |
| Control Type | Touchscreen |
| Weight | Approx. 30 kg |
| Electrical connection | 3 NAC 400V |
| Voltage | 400V |
| Cooking Capacity | 14 liters |
| Capacity | 14 liters |
| Temperature Range | 30°C to 250°C |
| Frequency | 50 Hz |
To Next Page
