Fringer EF-NZ Quick Start Guide

1
Fringer Canon EF to Nikon Z mount adapter
Firmware release notes
Applies to：
FR-NZ1 (Fringer EF-NZ)
2020/9/5
Verssion 1.40
1. Fixed compatibility issues with Z5
2. Added movie AF speed setting support for the following lens:
1) EF400mm f/2.8L IS II USM
2020/8/3
Verssion 1.30
3. Added movie AF speed setting support for the following lens:
1) Sigma 500/4 DG OS HSM Sports
2) EF400mm f/4 DO IS II USM
4. Fixed AF issues of the following lens:
1) EF180/3.5L
5. Fixed compatible issues with some of Tamron lenses, including (and may not limited
to):
1) Tamron AF 28-300mm f/3.5-6.3 XR Di VC LD Aspherical [IF] Macro (A20)
2) Tamron AF 70-300mm f/4-5.6 Di LD 1:2 Macro A17
2020/3/20
Version 1.20
1. Fixed compatible issues with some of EF/EFS lenses, including (and may not limited
to):
1) EF50/1.4 (some early version)
2) EF70-200/2.8L (some early version)
3) Tamron SP 10-24/3.5-4.5 B001
4) Tamron SP 28-75/2.8 XR Di LD
5) Sigma APO 800mm f/5.6 EX DC HSM
6) Sigma 50-150/2.8 EX Di HSM
2. Pinpoint AF has been fixed for
1) Tamron SP 35/1.4 Di USD
3. Added support for lenses without electronic contacts. Unlike Nikon FTZ adapter, when
installed on Fringer EF-NZ adapter, lenses without electronic contacts also get the
green square focus indication at the focus point position. When this function greatly
helps a lot of manual lens users, it has a drawback. The Non-CPU Lens Data menu
item doesn’t work anymore. Without correct focal length data, the IBIS function of
certain Z cameras, e.g. Z6 and Z7, doesn’t work properly. To fix this, we added manual

Fringer EF-NZ Specifications

General

Function	Lens adapter
Electronic Contacts	Yes
Mount Type	Canon EF/EF-S lens to Nikon Z mount
Compatibility	Nikon Z-mount cameras
Material	Metal
Aperture Control	Yes
Autofocus Support	Yes
Image Stabilization Support	Yes
Build Material	Metal