Turn device ON or OFF. | Calibrate the device.
Change the unit between pH and mV.
View the max and min values.
Store and recall past values.
Select Resolution. Hold for 1.5 seconds to switch between
0.01 and 0.1 pH.
Increase or decrease a value. This is normally used for
recording the input temperature.
Operation
PACKING LIST
● Fristaden Lab Digital pH meter
● pH Electrode
● Electrode Arm
● 3x Buffer Powders (pH 4.01, 7.00, 10.01)
● Power Cord
● User Manual
5
To Next Page